Toshiba 46SL417U, 42SL417U manual Selecting the picture mode, Adjusting the picture quality

Chapter 7: Picture and sound controls

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from the modes described below.

Mode	Description
	Automatically adjusts picture settings
AutoView®	based on ambient light conditions and
	input signal content.
Sports	Bright and dynamic picture.
Standard	Standard picture settings.
Movie 1	Lower contrast for darkened room.
Movie 2
	Designed for playing a video game
Game	requiring split-second timing between
	the screen display and input from the
	controller.
PC	Designed for the viewing of PC tables
	and documents.

Note:

•PC mode is available for HDMI and PC inputs only (not displayed for other input sources).

•Game mode cannot be turned on when the ANT/CABLE input is selected.

1 > Settings > PICTURE > Picture Mode.

2Press C or c to select a mode. Press .

Note:

•The picture mode you select affects the current input only. You can select a different picture mode for each input.

•The picture mode can be changed to Game mode by

pressing when the input mode is ColorStream HD, PC, VIDEO, or HDMI.

Adjusting the picture quality

The adjustments you make to picture quality under a picture mode are saved to that picture mode.

Selection	Pressing C	Pressing c
Backlight*	darker	lighter
Contrast	lower	higher
Brightness	darker	lighter
Color	paler	deeper
Tint	reddish	greenish
Sharpness	softer	sharper

*Backlight: Adjusts the brightness of the entire screen. When in video mode and no signal is input, this selection is set to 0. (Settings are stored in memory.)

Note: Some settings cannot be adjusted in any of the following cases.

•AutoView is selected.

•TheaterLock is set to On.

To adjust the picture quality:

1 > Settings > PICTURE > the setting you would like to adjust (Backlight, Contrast,

Brightness, Color, Tint, or Sharpness).

2Press C or c to adjust the setting. Press .

Note:

•Any picture settings that you adjust affect the current input only. You can adjust the picture quality separately for each input.

•Depending on a Sharpness value, the Edge Enhancer effect may be reduced.

To reset to the factory defaults:

1 Select the picture mode you want to reset.

2 > Settings > PICTURE > Reset > OK . A confirmation screen appears.

3Press C or c to select Yes. Press OK .

48