Daxten Voyager 300 manual Cable Requirements, UTP / STP Connection Cable Wiring

Page 6

Cable Requirements

Cables to connect the Voyager Local unit to your PC’s system unit are supplied in the package. Your keyboard, monitor and mouse will plug straight in to the Voyager Remote Unit.

The Local Unit to Remote Unit connection cable is not supplied; if you do not have suitable CAT 5, 5E or 6 UTP or STP cable fitted at you site, please consult your dealer.

The Local and Remote units are connected by industry standard structured cabling (Category 5, 5E or 6 UTP/STP, 4-pair) terminated with RJ45 connectors.

The cable used should be solid trunk cable. Stranded patch cable will give poor results over longer distances.

The connector wiring must meet the EIA/TIA 568 standart.

UTP / STP Connection Cable Wiring

The Local-Remote interconnection cable is terminated in RJ45 connectors and should be wired according to the EIA/TIA 568 (Scheme B preferred) industry standard. The Voyager will function with other wiring schemes, but the video quality may be impaired.

Orientation: Looking into the RJ45 socket pin 1 is on the left and Pin 8 on the right.

Pin

Wire Colour

Wire Pair

1

8

1

White/Yellow

T2

2

2

Orange

R2

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

White/Green

T3

3

 

 

 

 

 

 

 

 

 

4

Blue

R1

1

 

 

 

 

 

 

 

 

 

5

White/Blue

T1

1

 

 

 

 

 

 

 

 

 

6

Green

R3

3

 

 

 

 

 

 

 

 

 

7

White/Brown

T4

4

 

 

 

 

 

 

 

 

 

8

Brown

R4

4

 

 

 

 

 

 

 

 

 

The Voyager has been tested with all major makes of CAT 5 cable including BICC- VERO, Mohawk, and Brand-Rex. The Voyager has also been tested with most major makes of CAT 5E and CAT6 with good results.

Note: That failure to wire the twisted pairs correctly will impair the video quality dramatically and / or prevent correct operation.

This Voyager 300 extender is designed for use up to a maximum cable length of 350m/1200ft At this length the video quality should still be acceptable even at a screen resolution of 1200x1600 (75Hz). At distances over 100 m You might need a Skew Compensator. It depends on your cable cat5 or cat6 and monitor resolution.

Although a single continuous length of interconnect cable is preferable, operation is possible through multiple Patch Panels. However, the more patch panels the cable is routed through, the greater the chance of video signal degradation.

6

Image 6
Contents User and installation manual Voyager Limited Warranty Contents Operation FeaturesIntroduction CompatibilityGetting Started Important note on power supplies/mains adaptersPackage Contents CaveatUTP / STP Connection Cable Wiring Pin Wire Colour Wire PairCable Requirements Quick Setup System Guide ProcedureConnecting UP Cable Length mSkew KEY Mouse 5 V DC PS/2 Mouse Keyboard & Mouse EmulationKeyboard Mouse movement is erraticPicture is not sharp & is very smeary Video Resolution goes low when connecting trough VoyagerVideo Video Picture is black and white not colourGeneral Questions Service Information Maintenance and repairTechnical support Appendix A. General Specifications USA Ireland Spain