Tektronix 780 setup guide Set up the printer on a network, Connect to a PC

Page 39

Set up the printer on a network

1.Connect optional peripherals; refer to page 34 in this guide.

2.Find the PhaserShare Networking Setup Guide in the “Getting Started” box, and follow the instructions in that guide.

3.Install the printer software, then turn to page 35 in this setup guide.

Connect to a PC

1.Turn off the printer and your computer.

2.Use a high-density bidirectional parallel cable or a Tektronix 36-pin high-density printer to 25-pin DSUB PC cable (order number

012-1468-00). Otherwise, use a 36-pin to 36-pin parallel cable and the parallel adapter supplied with the printer.

C A U T I O N

The maximum length for the parallel cable is 3 meters (10 ft.).

3.Connect the parallel interface cable to your computer and to the printer’s parallel port.

3094-59

4.If you are connecting any optional peripheral devices, such as a scanner or hard disk, do so now; refer to page 34 for guidelines. Otherwise, turn on your computer and printer and proceed to “Install printer software” on page 35.

Setup Guide

33

Image 39

Contents S E R P R I N T E R Phaser 780 Color Laser Printer Setup Guide Pantone, Inc Phaser 780 Color Laser Printer Warranty Terms in manual Caution User safety summaryFor Users in Japan At a glance Getting Set UpFuser roll cartridge What you get with your printerOptions and accessories 70 kg 153 lbs Select a location59 m 62.5 61 m 63.7 150 mm 6 503 mm 551 mm 21.7 835 mm 32.5 T E Set up the printerLoad the toner cartridges 3094-71 Unpack the matching toner cartridge Shake the toner cartridge vigorously, seven or eight times U T I O N Install the imaging unit 3094-32 Set the two blue switches to the lock position Install the fuser roll cartridge Remove the two shipping inserts 3094-38 Push in the lower left unit Attach the multi-purpose tray and output extensions Push in the multi-purpose tray Unpack the output tray a. Orient it as shown b 3094-47 Turn on the printer Noises the printer makes as it warms up are normal Select a language for the front panel Load the paper tray 3094-53 Readjust the paper guides to the correct paper size Push in the paper tray Press Print Make a test printAttach the User Guide Printer ports Connect the printerConnect to a PC Set up the printer on a networkConnect optional peripheral devices PC/Windows software Install printer softwareInstalling the driver If you are setting up the printer on a network Conﬁguring the driver Macintosh software Select Custom Install Setting up the driver Register your printer Task / Information needed Resource Where Where to go from herePhaser 780 Color Laser Printer