Tektronix 780 setup guide Connect optional peripheral devices

Page 40

Connect optional peripheral devices

N O T E

Requires a SCSI port, available on optional printer conﬁguration.

The printer’s SCSI ID number is 7; available SCSI ID numbers for peripheral devices are 0 – 6. You can connect the following peripheral devices to the SCSI port:

■Scanner Allows you to use your printer as a color copier.

■External SCSI hard disk Provides additional storage for downloadable fonts or printer collation.

1.Turn off the printer and all SCSI devices before plugging in or unplugging any cables.

C A U T I O N

Failure to turn off the printer and any peripherals may result in damage to them.

2.Connect the cable to the device and to the SCSI port on your printer. Terminate the ﬁnal SCSI device on a SCSI chain.

Refer to the printer’s CD-ROM or the Tektronix web site for detailed information on connecting a SCSI device to your printer.

3094-60

34Phaser 780 Color Laser Printer

Image 40

Contents S E R P R I N T E R Phaser 780 Color Laser Printer Setup Guide Pantone, Inc Phaser 780 Color Laser Printer Warranty User safety summary Terms in manual CautionFor Users in Japan Getting Set Up At a glanceWhat you get with your printer Fuser roll cartridgeOptions and accessories Select a location 70 kg 153 lbs59 m 62.5 61 m 63.7 150 mm 6 503 mm 551 mm 21.7 835 mm 32.5 Set up the printer T ELoad the toner cartridges 3094-71 Unpack the matching toner cartridge Shake the toner cartridge vigorously, seven or eight times U T I O N Install the imaging unit 3094-32 Set the two blue switches to the lock position Install the fuser roll cartridge Remove the two shipping inserts 3094-38 Push in the lower left unit Attach the multi-purpose tray and output extensions Push in the multi-purpose tray Unpack the output tray a. Orient it as shown b 3094-47 Turn on the printer Noises the printer makes as it warms up are normal Select a language for the front panel Load the paper tray 3094-53 Readjust the paper guides to the correct paper size Push in the paper tray Make a test print Press PrintAttach the User Guide Connect the printer Printer portsSet up the printer on a network Connect to a PCConnect optional peripheral devices Install printer software PC/Windows softwareInstalling the driver If you are setting up the printer on a network Conﬁguring the driver Macintosh software Select Custom Install Setting up the driver Register your printer Where to go from here Task / Information needed Resource WherePhaser 780 Color Laser Printer