Getting Set Up
Connect the printer
The printer can be connected to networks, single workstations, and optional peripheral devices (scanners, hard drives).
Printer ports
The printer is shipped with three interface ports on the printer’s rear panel. Optionally, it supports a SCSI port and one of three optional PhaserShare network cards. All ports and network protocols are simultaneously active. However, the Ethernet port is disabled when a 100BaseT Ethernet card or Token Ring network card is installed.
1. | Ethernet | standard | 10BaseT interface |
| Refer to the PhaserShare Networking Setup Guide. | ||
2. | Parallel | standard | Standard |
| Refer to “Connecting to the parallel port” on page 10. | ||
3. | USB | standard | Universal Serial Bus port |
| Refer to “Connecting to the USB port” on page 13. | ||
4. | SCSI | optional | For optional peripheral devices |
| Refer to “Connecting a SCSI peripheral device” on page 12. | ||
5. | PhaserShare | optional | 100BaseT, Token Ring, or LocalTalk |
| Refer to the PhaserShare Networking Setup Guide. |
5
4
1 2 3
Setup Guide | 9 |