Getting Set Up
Set up the driver
1.From the Apple menu, select Chooser.
2.Click the icon of the printer driver (LaserWriter 8) on the left side of the window.
3.Click the Zone for your printer, if applicable.
4.From the list of printers on the right side of the window, select your printer. If it is not in the list, check the hardware connections and verify that you have selected the correct zone in the Chooser on the left side of the window.
5.Click Setup/Create to select the correct PPD (PostScript Printer Description) file.
6.After the automatic setup has completed, click Setup and click Configure.
7.Select the options that are installed in your printer (for example, memory configuration,
8.Click OK.
9.Close the Chooser.
Setup Guide | 33 |