Tektronix 071-0389-00 setup guide Turn on the printer

Page 20

Getting Set Up

Turn on the printer

C A U T I O N

To protect your printer from a power surge, make sure that the printer’s power switch is in the off position before plugging in the cord. Failure to do so may damage the printer.

1.Plug the power cord into the printer and into a grounded outlet.

2.Turn on the power to any peripherals you have connected.

3.Wait about 10 seconds, then turn on the printer.

0389-12

■The printer goes through a series of self-tests and warm-up, taking about 17 minutes. During the warm-up, a Cleaning Page will print.

■As the printer warms up, you will hear a series of noises; these are normal and are not an indication of problems with the printer.

14Phaser 840 Color Printer

Image 20

Contents L O R P R I N T E R Page Phaser 840 Color Printer Setup Guide Page Phaser 840 Printer Warranty User safety summary Terms in manual CautionGetting Set Up At a glanceUnpack the printer Remove the packing materialWhat you get with your printer An illustrated guide to your printer Exit cover release Printer’s back panel Set up the printer Select a location10 cm 4 Connect the printer Printer portsConnecting to the parallel port Connect to a Macintosh Ethernet-direct connection RequirementsConnecting a Scsi peripheral device Connecting to the USB port Turn on the printer Getting Set Up Add ink sticks Load media Loading paper Loading Phaser 840 printer transparencies 0389-17 Loading the optional High-Capacity Paper Trays 0389-19 Select a front panel language Print the Menu Map Menu MapLocate the User Guide Before you begin Install printer softwarePC/Windows software Install If you are setting up the printer on a network Conﬁguring the driver Windows 95, Windows 98, Windows NT4Macintosh software Install Click Continue Set up the driver Register your printer Where to go from here