REFRIGERATOR INSTALLATION
6.Lift the door from the lower hinge pin being careful to pull the water lines through the lower hinge pin.
7.Place the door, inside facing up, on a nonscratching surface.
Reinstalling the rigth (Refrigerator) door
(1)
| (2) |
(3) | (3) |
(4) | |
(5) | Rivet |
| (4) |
| (5) |
Type 1 | Type 2 |
|
1.Place the door onto the lower hinge pin.
2.Fit top hinge (4) over hinge lever latch (5) into place. Rotate lever (3) counterclockwise to secure hinge.
NOTE: Regardless the type of hinge lever (3); type1: without rivet or type 2: with rivet the removal process is the same.
3.Hook tab on switch side of corner under edge of wire opening in cabinet top. Position cover (2) into place. Insert and tighten cover screw (1).
Reinstalling the left (Freezer) door
(2) |
| |
(1) |
| |
(4) | (3) | |
(7) | ||
| ||
(5) | (5) | |
(6) | (6) | |
(7) | Rivet | |
| ||
Type 1 | Type 2 |
1.Feed the water tubes through the lower hinge pin and place the door onto the lower hinge pin.
2.Fit top hinge (6) over hinge lever latch (7) and into place. Rotate lever (5) clockwise to secure hinge
NOTE: Regardless the type of hinge lever (5); type1: without rivet or type 2: with rivet the removal process is the same.
3.Install the grounding screw (4) and connect all the wire harnesses (3).
4.Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and tighten cover screw (1).
5.Reconnect the water tubes by inserting the tubes into the connectors.
9
