Connecting the Power
The label maker is powered by a rechargeable, Lithium Polymer (LiPo) battery pack.
Inserting the Battery
The battery pack included with your label maker comes partially charged.
Make sure the charging adapter is disconnected before handling the LiPo battery pack.
To insert the battery
1 Lift the back cover of the label maker.
2 Insert the battery into the battery compartment following the polarity markings (+ and
3 Close the back cover of the label maker.
Make sure to read the LiPo Safety Precautions found on page 15.
Removing the Battery
Remove the battery pack if the label maker will not be used for a long period of time.
Make sure the charging adapter is disconnected before handling the LiPo battery pack.
To remove the battery
1Unplug the charging adapter.
2Lift the back cover of the label maker.
3Remove the battery from the battery compartment.
Make sure to read the LiPo Safety Precautions found on page 15.
2