Connecting the Label Maker to Your Computer
The label maker connects to your computer using the USB connection located on the top of the label maker.
Do not connect the label maker to your computer until after the software installation is complete.
To connect the label maker to your computer
1Plug the USB cable into the USB port on the top of the label maker.
2Plug the other end of the USB cable into an available USB port on your computer.
3If necessary, press to turn on the label maker.
4If you have more than one DYMO label printer installed, do the following: a Click the printer image in the DYMO Label software Print area.
All the label printers that are installed on your computer are displayed.
bSelect the LabelManager 500TS label maker.
9