Dymo RH-6000 manual Preparing for use, Unpacking, Power Supply

Page 6

Preparing for use

Unpacking		Remove the Labelmaker from the packaging carefully; observe any
		warnings or packaging information. Retain all packaging for
		possible future use.
Power Supply		The internal batteries will have been partially charged during
		manufacture.

		IMPORTANT: For maximum battery life, the internal batteries
		should be charged for AT LEAST 24 hours before using the
		machine on battery power for the first time.
		Connect the round plug from the AC adaptor into the power input
		socket on the Labelmaker (see Fig. 1), then plug the AC adaptor
		into a convenient wall socket. Switch on at the wall socket and
		leave it on charge for AT LEAST 24 hours.
		You can use the Labelmaker with power from the AC adaptor
		during the initial 24-hour charging period.

Connect the AC adaptor plug here

External interface socket

Fig. 1 — Rear/underside view

6	DYMO® 6000 Labelmaker

Image 6

Contents Dymo Electronic Labelmaker User’s Guide Addendum Or +Contents Dymo 6000 Electronic Labelmaker Caring for your Labelmaker Unpacking Power SupplyPreparing for use During the initial 24-hour charging periodExternal Interface Socket Battery life AC adaptorCreating your first label Auto~Ñ ß Description of keys Copies M key Cursor keys Main typewriter-style keyboardCat sat on no Entry the mat International charactersDisplay and indicators LCD display see FigMemory Saving a label to memoryRemoving a label from memory SearchSymbols Fax