Dymo RH-6000 manual Memory, Saving a label to memory

Page 15

Warning symbols The display includes a number of warning symbols which appear to alert you. These are:

‘M’ Memory full — there is no more room in the memory to store a label. Delete some labels to make room.

Cutter failure — there is a problem with the label tape cutter — see ‘Troubleshooting’, page 34.

No tape cassette installed — see page 28.

+The internal batteries need re-charging — see page 6.

Memory

The Labelmaker is capable of storing approximately 6,000 characters in its memory, with the ability to store up to approximately 4,000 characters on a single label.

When the Labelmaker is switched off (either manually, using ON/OFF , or automatically if no key has been pressed for one minute), the label currently displayed will be retained in memory and displayed when you switch on again.

Saving a label to memory

Recalling a label from memory

• To save a copy of your current label to memory, press M in ; the display will change to show m for one second to confirm.

If you then change the label, pressing M in again will save a

separate copy of the latest version of the label to the memory, i.e. both your original label and the changed version will be stored in the memory.

• To recall a label from memory, press MR and use ▲ or ▲ to scroll through the memory until the label required is displayed.

You can use ▲ or

▲ to move the cursor along the text in each

label. The cursor moves to the same position in the text as you

scroll through the labels.

 

• Press ESC to cancel

 

 

and return to the normal display.

 

MR

 

 

 

 

 

 

• Press

 

 

to place a copy of the selected label in the display at

 

 

 

the cursor position.

If there is a label already displayed, the copied label will be added to the current label at the cursor position.

Note: The layout of the current label may be adjusted automatically if:

you insert a label from memory which was created for a different width of label tape

the label you are inserting has multiple lines of text, colour changes or page breaks.

DYMO® 6000 Labelmaker

15

Image 15
Contents Dymo Electronic Labelmaker User’s Guide Or + AddendumContents Dymo 6000 Electronic Labelmaker Caring for your Labelmaker During the initial 24-hour charging period Power SupplyPreparing for use UnpackingAC adaptor External Interface Socket Battery lifeAuto Creating your first label~Ñ ß Description of keys Copies Main typewriter-style keyboard M key Cursor keysInternational characters Cat sat on no Entry the matLCD display see Fig Display and indicatorsSaving a label to memory MemorySearch Removing a label from memoryFax Symbols