3.Select Fixed Time or Autom. Updated and press 
.
When Autom. Updated is selected, a time 
icon is inserted on your label. When Fixed Time is selected, the actual time is inserted on your label in the format specified.
Printing Options
You can print multiple copies of a label at one time, print
Printing Multiple Copies
You can print up to 16 copies of a label at one time. When printing multiple copies, a dotted
To print multiple copies of the label
1. Press Settings and then select Set # Copies.
2.Press the up arrow key to increase the number of copies to print.
3.Press the down arrow key to begin decreasing the number of copies from 16.
4.Press 
.
5.Press 1,2...n
to begin printing.
You may notice a brief pause in printing between each label for more complex formats.
When printing is finished, the number of copies to print returns to the default value of 1.
Serializing Your Labels
You can print a series of labels with the last number incremented by one number. The number of labels serialized depends upon the number of copies you selected to print. Only the last series of numbers that follows any letter, space, or punctuation will be serialized. For example, abc123 will print as abc123, abc124, abc125; and
To serialize your labels
1. Enter the text for your label.
2. Press Settings and then select Set # Copies.
3.Press the up arrow key to increase the number of increments to print and press 
.
4.Press Shift + 1,2...n
.
The labels automatically print, each label incremented by one number.
Printing a Fixed-Length Label
Normally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text.
You can specify a fixed length for a label in
0.1” (2 mm) increments between 1.5” (40 mm) and 15.0” (400 mm). The preset fixed length is
4” (100 mm). Any change you make to the fixed- length setting remains in effect until you change it.
To set the label length
1.Press Shift + 
.
2.Press the up arrow to select Fixed Length On and then press 
.
3.Use the arrow keys to set the length.
4.Press 
.
After you print the label, you must reset the fixed- length label setting to OFF; otherwise, all your subsequent labels will print with this fixed length.
Adding Barcodes to Labels
The labelmaker can print barcodes in six standard formats: UPC A, UPC E, EAN8, EAN13,
You can print a barcode on 19 mm (3/4”) and 24
mm(1”) label tape; and you can print only one barcode per label.
11