SATO GY412 manual Turning on the Power

Page 15

Section 2: Turning On the Power

TURNING ON THE POWER

After installing the printer, connect the power cord as shown below.

CAUTION

•The power cord set supplied with this printer is only for use with this printer. Do not use it for other electrical products.

•Do not operate the POWER button or plug in/unplug the power cord with wet hands or wet fingers. Doing so could result in electric shock.

1.To connect the power cord to the printer, be sure to confirm the correct orientation of the plug. Plug the power cord into the printer. Use your other hand to secure the printer when connecting the power cord.

2.A three-prong power cord is provided. If your power socket has three contacts, the third one is connected to the ground for safety. If your power outlet has two slots, use a three-prong to two-prong adapter.

GY412 Quick Guide

Page 2-1

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Quick Guide FCC Statement Sato America, IncPictographic Symbols Safety PrecautionsDo not place in areas with high humidity Place the printer on a surface that is flat and level Keep the printer out of high temperature and hu- midityThis printer requires an AC power supply Connect the power cord to a grounded power outletGY412 Quick Guide Table of Contents GY412 Quick Guide About the BOX AccessoriesNames of Parts Back side of the printer GY412 Quick Guide Operator Panel This page is intentionally left blank Turning on the Power Turning OFF the Power Width direction Basic SpecificationsModel name GY412 Length directionCutter type Label sizeContinuous type Tear-off typeLINE, FEED, ENTER, FUNCTION, Cancel OCR-A Model name GY412 This page is intentionally left blank Sato Group of Companies
Top Page Image Contents