SATO GY412 manual Sato America, Inc, FCC Statement

Page 2

SATO America, Inc.

10350A Nations Ford Road

Charlotte, NC 28273

Main Phone: (704) 644.1650

Technical Support: (704) 644.1660

Technical Support Fax: (704) 644.1661

E-Mail: satosales@satoamerica.com

techsupport@satoamerica.com

www.satoamerica.com

© Copyright 2011 SATO America, Inc.

All rights reserved.

Reproduction in any manner of all or part of this document is prohibited.

The content of this document may be changed without prior notice.

Great care has been taken in the preparation of this document. If any problems, mistakes, or omissions are found, please contact your SATO reseller or technical support center.

FCC Statement

The printer complies with the requirements in Part 15 of FCC Rules for a Class B Computing Device. Operating the printer in a residential area may cause unacceptable interference to radio and TV reception. If the interference is unacceptable, you can reposition the equipment, which may improve reception.

Image 2
Contents Quick Guide Sato America, Inc FCC StatementSafety Precautions Pictographic SymbolsDo not place in areas with high humidity Connect the power cord to a grounded power outlet Keep the printer out of high temperature and hu- midityThis printer requires an AC power supply Place the printer on a surface that is flat and levelGY412 Quick Guide Table of Contents GY412 Quick Guide Accessories About the BOXNames of Parts Back side of the printer GY412 Quick Guide Operator Panel This page is intentionally left blank Turning on the Power Turning OFF the Power Length direction Basic SpecificationsModel name GY412 Width directionTear-off type Label sizeContinuous type Cutter typeLINE, FEED, ENTER, FUNCTION, Cancel OCR-A Model name GY412 This page is intentionally left blank Sato Group of Companies