Safety Precautions
Precautions for Installation and Handling
Printer operation can be affected by the printer environment.
Refer to the following instructions for installation and handling of the printer.
Select a Safe Location
Place the printer on a surface that is flat and level.
If the surface is not flat and level, this may result in poor print quality. This may also cause malfunction and shorten the life span of the printer.
Do not place the printer on a location that produces vibration.
Do not carry the printer when the roll label is set. Vibrating the printer may cause malfunction and shorten the life span of the printer.
Keep the printer out of high temperature and hu- midity.
Avoid locations subject to extreme or rapid changes in temperature or humidity.
Do not place the printer in a location subject to water or oil.
Do not place the printer in a location where it will be splashed with water or oil. Water or oil in the printer may cause a fire, electric shock, or malfunction.
Avoid dust.
Dust build up may result in poor print quality. This may cause not only malfunction but also shorten the life span of the printer.
Keep out of direct sunlight.
This printer has a
Close the top cover when printing.
Power Supply
This printer requires an AC power supply.
Be sure to connect the printer to an AC power supply via the supplied AC adapter. Failure to do so may result in malfunction.
Connect the power cord to a grounded power outlet.
Make sure that the printer is plugged into a grounded power outlet.
Provide a stable source of electricity to the printer.
Do not share the power outlets with other appliances such as a heater and refrigerator requiring a measurable amount of power. Also, avoid using the power outlet near where such appliances are plugged into. This may cause voltage reduction and malfunction.
GY412 Quick Guide | Page iii |