SATO 9001147B manual Scope, Overview

Page 3

SCOPE

This document is to serve as a guide on how to create RFID data using Label Gallery Plus/ TruePro software. It will include menu selection and all relative command code sequences.

OVERVIEW

The Alien Technologies RFID Reader and antenna are integrated into printer among the standard components. A data cable connects the main circuit board to the RFID Reader. The Reader is, in turn, connected to the antenna by its own antenna cable. Through software configuration and hardware installation, the printer is then capable of writing and verifying EPC Class-1 RFID tags. Tag location and orientation within the label is critical to the performance of the unit.

All “e” series, plug-in interfaces may be used with the RFID print engine, including Ethernet and 802.11b wireless interfaces.

The following process details the steps involved in writing to the EPC tag:

SATO RFID User Guide

PN 9001147B

Page 1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rfid User Guide Sato America, Inc Overview ScopeRfid Hardware Configuration Rfid Antenna SpecificationsRfid Reader Specifications PIN Assignments Description Direction EXT ConnectorRfid Menus Display Description Rfid Specific Menu ItemsLabel Gallery Sato Rfid User Guide PN 9001147B Ascii Sato Rfid User Guide PN 9001147B Sato Rfid User Guide PN 9001147B EPC Code Read Designation Command EPC Code Write Designation Command
Top Page Image Contents