RFID HARDWARE CONFIGURATION
The RFID hardware kit is comprised of the: RFID Module, RFID Antenna w/coaxial cable, RFID Cable Set. The figure below displays configuration:
RFID ANTENNA SPECIFICATIONS
Module | 85.47 x 53.98 x 7.62 mm (sealed in a shield case) |
Antenna | 16 x 118 x 1.6 mm |
|
|
RFID READER SPECIFICATIONS
Name | |
Frequency | |
Communication System | Frequency hopping spectrum dispersion |
Transmission Output | Maximum 1W (30 dBm), Uses less than 250mW |
Transmission Output Control | 14dB and 0.1 dB steps |
Communications Protocol | EPC global UHF, Class 1 |
Source Voltage | |
Demand Current | Maximum 650 mA |
Electrostatic Voltage Resistance | ESD Class 2 |
|
|
SATO RFID User Guide | PN 9001147B | Page 2 |