Esselte LP300 manual Pattern + Vert, Last Label Memory, Alignment + LTH, Euro Conversion C or + C

In this example, there are three saved labels, the cursor is under the one which was last changed and the contents of that label is displayed on the second line.

	You can press				+	PREVIEW
						CAPS to preview the entire
	contents of the label if required.
•	Use	or		to move the cursor under an empty
	location, then press						to save your label and return to
	the label, or			DEL	to exit and return to the label.
•	To delete the contents of a memory location, use
	or		to move the cursor under the location, then
	press		+ CLEAR .
				DEL
RECALL		+		RECALL
				BOXES
				UL
			RECALL
•	Press	+		BOXES	to display the memory locations of
				UL
	saved labels - as shown in ‘SAVE’ above.
	To recall a saved label, use or to move the cursor
	under each full location, until the label you require is
	displayed.					PREVIEW
	You can press				+
						CAPS to preview the entire
	contents of the label if required.
•	Press		to select the label required, or DEL to exit and
	return to the current label.
•	To delete the contents of a memory location, use
	or		to move the cursor under the location, then
	press		+ CLEAR .
				DEL

PATTERN

PATTERN + VERT

Background patterns or text cannot be printed on 6mm wide labels, or with Mirror, Vertical or BIG text.

•If a pattern is already in use (the PATTERN indicator is

PATTERN

lit in the display), pressing + VERT will cancel the pattern.

PATTERN

•Press + VERT to display the pattern menu:

bricks check weave

woodgrain tint tartan text diamonds

•Use or to move the cursor under the pattern required.

•Press to select the pattern required (the PATTERN indicator will light in the display), or DEL to exit and return to the current label.

A label previously saved in one of the ten memory locations can be used as background text on another label. For example, a label already saved containing the name DYMO can be printed in the background of a label with has LP300 as the forground text:

DYMOLP300

Note that background text is always printed in BIG font, (regardless of the size selected for the original label) and the amount of backgound text printed is determined by the length of the foreground label.

•For background text, select ‘A’ . The display will show the saved labels locations:

Contents of lab

Use or to move the cursor under the label location required.

•Press to select the label required (the PATTERN indicator is lit in the display) and return to the current label which will be the foreground text.

•Press PRINT to print the label.

LAST LABEL MEMORY

•The unit will store the last label text and settings when turned off. Upon power-up, these will be restored and displayed. Removal of the batteries for more than a few

seconds may cause this information to be lost.

ALIGN

ALIGNMENT + LTH

ALIGN

• If a fixed label length is set, each press of + LTH will

align the image to the left, the center or the right of the label, as shown in the display.

C

EURO CONVERSION C or + C

The Labelpoint can be set to convert a chosen currency

C

into C or out of + C Euros. When this is selected, the label is scanned from right to left for a valid number. The first occurence of a comma (,) or a full stop (.), reading from right to left, will be read as a decimal point. For example:

• If set to convert between Euros and Belgian Francs

C

(see ‘Euro Set-up’ below), pressing + C will

convert the number on the label into Belgian Francs and add the BF value to the end of the label:

‘Sale 10.00/’ becomes ‘Sale 10.00/BF403.40’

If the original number is at the end of the label, it will be replaced by the BF value:

‘Sale 10.00’ becomes ‘Sale BF403.40’

•Pressing C will convert the number on the label into Euros and add the Euro value to the end of the label:

‘Sale 10.00/’ becomes ‘Sale 10.00/e0.24’

If the original number is at the end of the label, it will be replaced by the Euro value:

‘Sale 10.00’ becomes ‘Sale e0.24’

Note that values are rounded to the nearest one hundreth of a unit.

7