Esselte LP300 = Dymo, Justify Just, Vertical Text Vert, MULTI-LINE Printing, Label Length LTH

•Large height is available on 19mm labels only. Medium height is available on all except 6mm labels. Small height is available on all labels.

• Press SIZE to select the size menu:

Underlined -

—

Square Box -

Pointed Box -

=DYMO

=

=

	B	Round Corners -	=
		Crocodile Box -	=
Use	to select the size symbol required, then press
		Scroll Box -	=
to confirm the selection.

The "B" (BIG FONT) mode will produce highly visible labels using the entire print height. In “B” mode, all text will be printed as capitals (without accents).

•To create a label in "B" mode use or to move the cursor under "B" and press (BFONT lights in display).

•When "B" is selected, all other options are not available.

JUSTIFY JUST

Labels are normally printed with the text left-justified. On multi-line labels, press JUST to select left-justified, right- justified or centred text, as shown in the display. See also LABEL LENGTH.

VERTICAL TEXT VERT

•Rotates the text through 90° so that the label is printed

ve r t i c a l l y , as confirmed by the VERT indicator in the display.

•Press again to cancel and return to horizontal text. Note: Vertical text is not available on multi-line labels.

MULTI-LINE PRINTING

• Press to start the next line of text on a multi-line label, e.g.

This is a two line label in the display will be

printed as:

This is a two	and the display will	1
line label	indicate 2 lines:	2

	3-D Box -		=
•	Use	or to move the cursor under the desired
	option. Either press			to select the option (confirmed
	by the	or — indicator displayed), or DEL to exit .
•	When the	or — indicator is displayed, press UL				to
					BOXES
	cancel the Box/Underline option.

LABEL LENGTH LTH

The length is normally calculated automatically, according to the length of the text on the label.

The label length function displays the last used fixed label length, eg:

40mm 1 10

•Press DEL to exit the length function without changing the length, or:

•Use or to increase (5000mm / 196.85 inches max.) or decrease the length in 1mm / 0.04 inch

steps, or or to increase or decrease the length in 10mm / 0.4 inch steps. The minimum fixed label length is 45mm / 1.8 inch.

•Press to fix the length for all subsequent labels, confirmed by the LTH SET indicator in the display.

• Press LTH to cancel the fixed length and restore the automatic length.

Labels can be created as follows:

6mm	1 line small text	19mm
9mm
	Up to 2 lines
	small text
9mm	1 line medium text	19mm
12mm
	Up to 2 lines
	small text

Up to

4lines small text

Up to 2 lines medium text

•If the fixed length is too short for the text, when you

PREVIEW

press PRINT or + CAPS the display will show how much longer the label is than the fixed length, eg:

and it will not print. Either cancel the fixed length (see

above), or press LTH twice and use to increase the

length; the label is now long enough and can be printed.

		19mm	1 line large text
12mm	1 line medium text

The line indicator in the display will confirm the number of lines in the label.

BOXED/UNDERLINED PRINTING BOXES

UL

•If no Box/Underline option has been selected, pressing

BOXES once will display the menu below:

UL

COPIES

MULTIPLE COPIES + STYLE

•Your Labelpoint can provide multiple copies within the range 1-99.

COPIES

•To use this facility press then STYLE to show the last number of copies set on the display, for example

# = 03 . Use or to increase or decrease the number of copies required, then press to confirm (COPIES indicator lights in the display). To print the desired quantity press PRINT .

5