Nortel Networks Installing Media Dependent Adapters manual 2M3 and 450-2S3 MDA Description

Page 32

Table 11 describes the 450-2M3 MDA and 450-2S3 MDA front-panel components.

Table 11. 450-2M3 and 450-2S3 MDA Description

Item

Label

Description

 

 

 

1

Rx

Receive Status:

 

 

On steady (green): Valid

 

 

communications link; no activity.

 

 

On steady (yellow): No valid

 

 

communications link.

 

 

Off: The MDA is broken (or not fully

 

 

seated in the slot).

 

 

Blinking (green): Valid

 

 

communications link; receive activity.

2

Tx

Transmit Status:

 

 

On steady (green): Valid

 

 

communications link; no activity.

 

 

On steady (yellow): No valid

 

 

communications link.

 

 

Off: The MDA is broken (or not fully

 

 

seated in the slot).

 

 

Blinking (green): Valid

 

 

communications link; Transmit activity.

3

 

SC port connectors.

 

 

 

30

Image 32
Contents Installing Media Dependent Adapters MDAs Copyright 2001 Nortel Networks Introduction MDA ModelsLists the supported Nortel Networks products Supported Products/Minimum SW Versions10BASE-T/100BASE-TX MDAs Shows the 400-4TX MDA and the 8100-4TX MDA 4TX / 8100-4TX MDA Item Label DescriptionShows the BPS2000-4TX MDA Describes the BPS2000-4TX MDA front-panel components 100BASE-FX MDAs Page Dual-Port 100BASE-FX Models Shows the 400-2FX MDA and the 8100-2FX MDAs2FX and 8100-2FX MDAs 2FX MDA / 8100-2FX MDA Description BPS2000-2FX MDA BPS2000-2FX MDA DescriptionQuad-Port 100BASE-FX Models Shows the 400-4FX MDA and the 8100-4FX MDA 4FX MDA / 8100-4FX MDA Description BPS2000-4FX MDA BPS2000-4FX MDA DescriptionActivity Port activity LEDs green 1000BASE-X MDAs Page Shortwave Gigabit Models Shows the 450-1SR MDA and the 450-1SX MDA1SR and 450-1SX MDA Front Panels 1SR / 450-1SX MDA Description Longwave Gigabit Models See 1000BASE-LX Multimode Applications on1LR and 450-1LX MDA Front Panels 1LR and 450-1LX MDA Description PHYATM MDAs Page Shows the 450-2M3 MDA and 450-2S3 MDA 2M3 and 450-2S3 MDA Description Gbic MDA Page 1GBIC MDA Front Panel Describes the 450-1GBIC MDA front-panel components 1GBIC MDA DescriptionInstalling an MDA Press the MDA firmly into the Uplink/Expansion Module slot Replacing an MDA Attach devices to the MDA portsInstalling GBICs Available Gbic ModelsInstallation Gbic Case StylesTo install a Gbic Removing an Installed Gbic Cabling Specifications for GBICs1000BASE-LX Multimode Applications