Nortel Networks Installing Media Dependent Adapters manual

Page 9

Table 4 describes the BPS2000-4TX MDA front-panel components.

Table 4. BPS2000-4TX MDA

Item Label Description

1

10/100

10BASE-T/100BASE-TX port status LEDs:

On (green): The corresponding port is set to operate at 100 Mb/s.

On (yellow): The corresponding port is set to operate at 10 Mb/s.

Off: The link connection is bad or there is no connection to this port.

2

Activity Port activity LEDs (green):

Blinking (green): Indicates the network activity level for the corresponding port. A high level of network activity can cause LEDs to appear to be on continuously.

Off: No traffic to this port.

310BASE-T/100BASE-TX RJ-45 (8-pin modular) port connectors.

7

Image 9
Contents Installing Media Dependent Adapters MDAs Copyright 2001 Nortel Networks MDA Models IntroductionSupported Products/Minimum SW Versions Lists the supported Nortel Networks products10BASE-T/100BASE-TX MDAs Shows the 400-4TX MDA and the 8100-4TX MDA Item Label Description 4TX / 8100-4TX MDAShows the BPS2000-4TX MDA Describes the BPS2000-4TX MDA front-panel components 100BASE-FX MDAs Page Shows the 400-2FX MDA and the 8100-2FX MDAs Dual-Port 100BASE-FX Models2FX and 8100-2FX MDAs 2FX MDA / 8100-2FX MDA Description BPS2000-2FX MDA Description BPS2000-2FX MDAQuad-Port 100BASE-FX Models Shows the 400-4FX MDA and the 8100-4FX MDA 4FX MDA / 8100-4FX MDA Description BPS2000-4FX MDA Description BPS2000-4FX MDAActivity Port activity LEDs green 1000BASE-X MDAs Page Shows the 450-1SR MDA and the 450-1SX MDA Shortwave Gigabit Models1SR and 450-1SX MDA Front Panels 1SR / 450-1SX MDA Description See 1000BASE-LX Multimode Applications on Longwave Gigabit Models1LR and 450-1LX MDA Front Panels PHY 1LR and 450-1LX MDA DescriptionATM MDAs Page Shows the 450-2M3 MDA and 450-2S3 MDA 2M3 and 450-2S3 MDA Description Gbic MDA Page 1GBIC MDA Front Panel 1GBIC MDA Description Describes the 450-1GBIC MDA front-panel componentsInstalling an MDA Press the MDA firmly into the Uplink/Expansion Module slot Attach devices to the MDA ports Replacing an MDAAvailable Gbic Models Installing GBICsGbic Case Styles InstallationTo install a Gbic Cabling Specifications for GBICs Removing an Installed Gbic1000BASE-LX Multimode Applications