Removing an Installed GBIC
To remove an installed GBIC:
1.If the GBIC has spring tabs, press in on the tabs on each side of the GBIC as you pull the GBIC out of the MDA’s Host port (Figure 14).
9826FA
Figure 14. Removing a GBIC
2.If the GBIC has an extractor handle, grasp the handle and pull firmly to remove the GBIC from the MDA’s Host port.
Cabling Specifications for GBICs
For more information about supported GBICs and for details about cabling specifications, refer to the Gigabit Interface Converter (GBIC) Installation Guide (part number
41