Nortel Networks 3300 manual Using a T7406 Phone, Charging the Battery

Page 10

USING A T7406 PHONE

Charging the Battery

To correctly connect the handset charger:

1.Plug the small connector of the power adapter to the back of the charger.

2.Plug the power adapter into a wall socket.

To correctly charge a new battery pack:

WARNING: The rechargeable battery pack must be fully charged before you use your T7406 phone for the first time.

1.Charge the battery pack in the battery port at the back of the charger for a minimum of 30 minutes.

2.Install the battery pack onto the back of the phone.

3.Put the phone in the phone port of the charger. When the contacts touch correctly, the phone charge indicator (left LED on charger) turns red. The battery pack is fully charged when the phone charge indicator turns green (three hours).

4.Place the spare battery pack in the back battery port on the charger. When the contacts touch correctly, the battery charge indicator (right LED on charger) turns red. The battery pack is fully charged when the battery charge indicator turns green (about 12 hours).

-5-

Image 10

Contents CITELlink Gateway For 7000 Series Norstar Phones Page Contents Making and Answering Calls Using Advanced Features About Your Phone Conventions Phone status indicatorsPhone buttons Dont cradle the handset Tips for Your Comfort and SafetyUsing Your Norstar Phone with the 3300 CITELlink Gateway Protect your hearingAbout Wireless Phones To correctly charge a new battery pack Using a T7406 PhoneCharging the Battery To correctly connect the handset chargerTo change a battery pack Telephone Setup To set your phone ID numberTo assign your phone to a base station Headset Calls Handset Asleep ModeHandset Lock To lock the handsetTo attach the belt clip Belt ClipWrist Strap To remove the belt clipRinger Control Handset Receiver Volume ControlCustomizing Your Phone Microphone MuteLanguage Change Feature KeysMaking and Answering Calls Make a callRedial Saved Number Answer a callEnd a call PhonebookTo dial a stored Speed Call number Speed Call KeysTo store a Speed Call number Muting a Call Call HandlingSpeed Call Personal HoldConference TransferConference Split To move a call on Hold to another line appearance Add HeldSwap To alternate between the two partiesTo program Call Forward Call ForwardTo turn Call Forward on and off once it has been programmed Call Forward Remote Call Forward End ChainingCall Forward Override Call Forward ForcedMessaging Advisory To answer a Callback Messaging CallbackTo respond to a message waiting condition on your phone To check for messages from a remote stationTo cancel a Callback Messaging Cancel CallbackMessaging Cancel All Callbacks To cancel all CallbacksCall Park Using Advanced FeaturesAccount Codes Call PickupDo Not Disturb CamponOverride To use Paging PagingDirect Paging To page a partyReminder To view, change, and/or cancel a pending ReminderTo acknowledge a Reminder when your phone rings once To program a ReminderTrunk Flash To respond to a Group Page by using Meet Me AnswerGroup Paging / Meet Me Answer To make a GroupRecord a Call