Nortel Networks 3300 manual To assign your phone to a base station

Page 13

To assign your phone to a base station:

If your installer has already set up a base station, obtain the security code, and perform steps 1 to 7 of this procedure.

If you need to assign a security code to the base station, perform all the steps in this procedure.

1.Press the Options/Mute button.

2.Press the SHOW softkey.

3.Press the NEXT softkey until the display shows "4. Set S.S. Code".

4.Press the SHOW softkey. The display shows "Press 6 digits".

5.Using the keypad, enter the 6-digit security code assigned to the base station you are connecting to.

6.Press the OK softkey. The display shows "4. Set S.S. Code".

If you are assigning a phone to an existing base station, your phone is now connected to the system.

If you are assigning the first phone to a new base station (which has no security code), continue with the following steps.

7.When the display shows "4. Set S.S. Code", press the NEXT softkey to get ready to send the security code to the base station. The display shows "5. Send S.S. Code".

8.Unplug the AC power adapter connected to the base station, and plug it back in again.

9.Within 15 seconds, press and hold the OK softkey for 5 seconds to send the security code to the base. When the transfer is successful, the display shows "Send OK!" and you hear a beep.

Note: If the security code transfer fails, the display shows "Send Error!".

To correct this, repeat steps 9 and 10.

0. Press the Options/Mute button. The display shows the time and date.

-8-

Image 13

Contents CITELlink Gateway For 7000 Series Norstar Phones Page Contents Making and Answering Calls Using Advanced Features About Your Phone Conventions Phone status indicatorsPhone buttons Using Your Norstar Phone with the 3300 CITELlink Gateway Tips for Your Comfort and SafetyDont cradle the handset Protect your hearingAbout Wireless Phones Charging the Battery Using a T7406 Phone To correctly charge a new battery pack To correctly connect the handset chargerTo change a battery pack To set your phone ID number Telephone SetupTo assign your phone to a base station Handset Lock Handset Asleep ModeHeadset Calls To lock the handsetWrist Strap Belt ClipTo attach the belt clip To remove the belt clipCustomizing Your Phone Handset Receiver Volume ControlRinger Control Microphone MuteMaking and Answering Calls Feature KeysLanguage Change Make a callEnd a call Answer a callRedial Saved Number PhonebookTo dial a stored Speed Call number Speed Call KeysTo store a Speed Call number Speed Call Personal Call HandlingMuting a Call HoldConference TransferConference Split Swap Add HeldTo move a call on Hold to another line appearance To alternate between the two partiesTo program Call Forward Call ForwardTo turn Call Forward on and off once it has been programmed Call Forward End Chaining Call Forward RemoteCall Forward Override Call Forward ForcedMessaging Advisory To respond to a message waiting condition on your phone Messaging CallbackTo answer a Callback To check for messages from a remote stationMessaging Cancel All Callbacks Messaging Cancel CallbackTo cancel a Callback To cancel all CallbacksAccount Codes Using Advanced FeaturesCall Park Call PickupDo Not Disturb CamponOverride Direct Paging PagingTo use Paging To page a partyTo acknowledge a Reminder when your phone rings once To view, change, and/or cancel a pending ReminderReminder To program a ReminderGroup Paging / Meet Me Answer To respond to a Group Page by using Meet Me AnswerTrunk Flash To make a GroupRecord a Call