Nortel Networks Media Dependent Adapter manual

Page 4

Table 2.	Supported Products

Model		BayStack	BayStack	Accelar
Model		3501/450	410	8132TX
		3501/450	410	8132TX

400-4TX MDA		Yes	Yes	No
400-2FX MDA		Yes	Yes	No
400-4FX MDA		Yes	Yes	No
450-1SR MDA		Yes	No	Yes
450-1SX MDA		Yes	No	Yes
450-1LR MDA		Yes	No	Yes
450-1LX MDA		Yes	No	Yes
8100-4TX MDA		Yes	Yes	Yes
8100-2FX MDA		Yes	Yes	Yes
8100-4FX MDA		Yes	Yes	Yes

1BayStack 350 10/100/1000 Series switches only.

Note: The MDAs are not hot-swappable. Power down the BayStack switch or disconnect the Accelar module from the switch backplane before installing or removing an MDA.

2

Image 4

Contents Installing Media Dependent Adapters MDAs By Nortel Networks, Inc Introduction MDA ModelsPage 10/100BASE-TX MDAs 100BASE-TX ModelsPage 100BASE-TX MDA Item Label Description100BASE-FX MDAs 10/100BASE-TX MDAPage Page BASE-FX MDA Models 1 Describes the 100BASE-FX MDA components and LEDs BASE-FX MDA Description Label 1000BASE-SX MDAs Page BASE-SX MDA Front Panels BASE-SX MDA Description Label To this port 1000BASE-LX MDAs Page There are two 1000BASE-LX longwave gigabit MDA models Page BASE-LX MDA Description Label PHYInstalling an MDA Press the MDA firmly into the Uplink Module slot Cycle the switch power Replacing an MDA with a Different Model1000BASE-LX Multimode Applications