Nortel Networks Media Dependent Adapter manual Press the MDA firmly into the Uplink Module slot

Page 25

1	2				3
	Uplink/Expansion Module	25	26	27	28

100

10

F Dx

Activity

400-4TX MDA

1	= Card guides
2	= Uplink module slot
3	= BayStack or Accelar switch	BS45059B
		BS45059B

Figure 6. Installing an MDA

4.Press the MDA firmly into the Uplink Module slot.

Be sure that the MDA is fully seated into the mating connector.

5.Secure the MDA by tightening the thumb screws on the MDA front panel.

6.Attach devices to the MDA ports.

Refer to your device user guide for instructions on attaching devices to the MDA ports.

23

Image 25

Contents Installing Media Dependent Adapters MDAs By Nortel Networks, Inc MDA Models IntroductionPage 100BASE-TX Models 10/100BASE-TX MDAsPage Item Label Description 100BASE-TX MDA10/100BASE-TX MDA 100BASE-FX MDAsPage Page BASE-FX MDA Models 1 Describes the 100BASE-FX MDA components and LEDs BASE-FX MDA Description Label 1000BASE-SX MDAs Page BASE-SX MDA Front Panels BASE-SX MDA Description Label To this port 1000BASE-LX MDAs Page There are two 1000BASE-LX longwave gigabit MDA models Page PHY BASE-LX MDA Description LabelInstalling an MDA Press the MDA firmly into the Uplink Module slot Replacing an MDA with a Different Model Cycle the switch power1000BASE-LX Multimode Applications