Nortel Networks Media Dependent Adapter manual 100BASE-TX MDA, Item Label Description

Table 3. 10/100BASE-TX MDA

Item Label Description

1 100 100BASE-TX port status LEDs (green):

On: The corresponding port is set to operate at 100 Mb/s.

Off: The link connection is bad or there is no connection to this port.

Blinking: The corresponding port is management disabled.

2 10 10BASE-T port status LEDs (green):

On: The corresponding port is set to operate at 10 Mb/s.

Off: The link connection is bad or there is no connection to this port.

Blinking: The corresponding port is management disabled.

3 F Dx Full-duplex port status LEDs (green):

On: The corresponding port is in full-duplex mode.

Off: The corresponding port is in half-duplex mode.

(continued)

5