Nortel Networks V.34 manual Enable default software services

Using the V.34 Modem Adapter Module in a Passport 5430 Multiservice Access Switch

Completing Software Configuration

Once you have successfully installed the V.34 Modem adapter module, complete the following software configuration tasks using instructions found in your BayRS documentation:

Configuration Task	Location of Instructions
Modify the Passport 5430 configuration file	One of the following:
to add the V.34 Modem adapter module and	• Configuring and Managing Routers with
enable default software services.	Site Manager
	• Using the Bay Command Console
When using Bay Command Console (BCC)	(BCC)
commands on a Passport 5430 router, note
that the name for the V.34 Modem adapter
module is arnv34.
Configure V.34 modem services.	Configuring Dial Services

For the latest information, be sure to review the release notes and documentation change notice for your version of BayRS software.

Interpreting LEDs

The V.34 modem adapter module has four LEDs, located to the right of the connector (Figure 2-2).

Telco

TXRLSD

V.34 Modem RX DTR

Complies with FCC Rules Part 68 Reg. Number 4P8USA-30661-MD-E Ringer Equivalence 0.6B

ARN0107A

Figure 2-2. V.34 Modem Adapter Module LEDs

303127-D Rev 00 2-5