Transcend Information 18 mobile, SJ18M Disconnecting from a Computer︱, Safely Remove Hardware

Page 11

Disconnecting from a Computer

NEVER disconnect the StoreJet® from a Computer when its LED is flashing.

Removing the StoreJet® 18 in Windows® 2000, XP and Windows Vista®

1.Select the Hardware icon on the system tray.

2.The Safely Remove Hardware pop-up window will appear. Select it to continue.

Figure 7: Safely Remove Hardware

3.A window will appear stating, “The ‘USB Mass Storage Device’ device can now be safely removed from the system.

Figure 8: Safe to Remove Hardware

WARNING! To prevent data loss, always use this procedure to remove the StoreJet® from Windows® 2000, XP and Vista®.

Removing the StoreJet® 18 in Mac® OS 9.0, or Later

Drag and drop the Disk icon that represents your StoreJet® 18 into the trashcan. Then unplug your StoreJet® 18 from the USB port.

Removing the StoreJet® 18 in LinuxTM Kernel 2.4, or Later

Execute umount /mnt/StoreJet to un-mount the device. Then unplug your StoreJet® 18 from the USB port.

9

Image 11
Contents StoreJet 18 mobile User’s Manual Table of Contents Introduction︱ Features︱ General Use Extra USB connector provides additional power for StoreJet StoreJet 18 mobile Product Overview︱Driver Installation for Windows→ 2000, XP and Windows Vista→ Mini USB to Standard-A USB cable USB Y-cable Connecting to a Computer︱OneTouch Auto-Backup Button Safely Remove Hardware Disconnecting from a Computer︱Windows 2000/XP Formatting the Hard Drive︱Click the Close button to finish and exit Run as administrator Press Start Click the Close button to finish and exit My computer does not recognize the StoreJet Troubleshooting︱Operating system cannot detect the StoreJet Linux cannot detect the StoreJet StoreJet 18 does not Power-ONCannot back up files on my Mac Ordering Information︱ Specifications︱Transcend Information, Inc Transcend Limited Warranty︱