Transcend Information TS120GSJ18M Extra USB connector provides additional power for StoreJet

Page 6

The extra USB connector provides additional power for the

StoreJet® 18

•Please use the Mini USB to USB A-Type cable that came with the StoreJet® 18 to connect it to a computer, and always ensure that the cable you are using is in good condition. NEVER use a cable that is frayed or damaged.

•Ensure nothing is resting on the USB cable and that the cable is not located where it can be tripped over or stepped on.

Reminders

Always follow the procedures in the “Disconnecting from a Computer” section to remove the StoreJet® from your computer.

4

Image 6

Contents StoreJet 18 mobile User’s Manual Table of Contents Introduction︱ Features︱ General Use Extra USB connector provides additional power for StoreJet Product Overview︱ StoreJet 18 mobileDriver Installation for Windows→ 2000, XP and Windows Vista→ Connecting to a Computer︱ Mini USB to Standard-A USB cable USB Y-cableOneTouch Auto-Backup Button Disconnecting from a Computer︱ Safely Remove HardwareFormatting the Hard Drive︱ Windows 2000/XPClick the Close button to finish and exit Run as administrator Press Start Click the Close button to finish and exit Troubleshooting︱ Operating system cannot detect the StoreJetMy computer does not recognize the StoreJet StoreJet 18 does not Power-ON Cannot back up files on my MacLinux cannot detect the StoreJet Specifications︱ Ordering Information︱Transcend Limited Warranty︱ Transcend Information, Inc