Transcend Information TS4/8GUSDHC6-P3 Ccc, Readbllen, Readblpartial, Writeblkmisalign, Dsrimp

Page 16

TS4/8GUSDHC6-P3

4/8GB microSDHC Class 6 Card + Reader P3

 

 

 

Note that for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card.

In High-Speed mode, that field must be always 0_1011_010b (05Ah) which is equal to 50MHz. And when the timing mode returns to the default by CMD6 or CMD0 command, its value will be 032h.

•CCC

The SD Memory Card command set is divided into subsets (command classes). The card command class register CCC defines which command classes are supported by this card. A value of ‘1’ in a CCC bit means that the corresponding command class is supported.

•READ_BL_LEN

This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte.

•READ_BL_PARTIAL

This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed.

•WRITE_BLK_MISALIGN

This field is fixed to 0, which indicates write access crossing physical block boundaries is always disabled in High Capacity SD Memory Card.

•READ_BLK_MISALIGN

This field is fixed to 0, which indicates read access crossing physical block boundaries is always disabled in High Capacity SD Memory Card.

•DSR_IMP

Defines if the configurable driver stage is integrated on the card. If set, a driver stage register (DSR)must be implemented also.

Transcend Information Inc.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Description Features Placement8GB microSDHC Class 6 Card + Reader P3 Pin DefinitionArchitecture Power Supply Voltage Bus Signal Line LoadBus Operating Conditions General Current ConsumptionSingle card capacitance Bus Signal Levels Parameter Symbol Min Max Unit RemarkBus Timing Output Delay time during Data Transfer Mode Bus Timing High Speed Mode Output Hold time Reliability and Durability Register Information OCR registerMID OIDPNM PRVMDT PSNCRC Csdstructure CSD Register Fields CSD VersionNsac TaacTranspeed CCC ReadbllenReadblpartial WriteblkmisalignWpgrpenable CsizeEraseblken SectorsizeCopy PermwriteprotectTmpwriteprotect FileformatRCA Register Sdspec ScrstructureDatastataftererase Sdsecurity SdbuswidthsMechanical Description Top View Mechanical Description Bottom View Mechanical Description Keep Out Area MicroSD package Dimensions Description Placement DimensionsSystem Requirements USB Pinouts Block DiagramUSB Pin Identification DC Characteristics DC Electrical Characteristics of 3.3V I/ORecommended Operating Conditions Parameter MIN
Top Page Image Contents