Transcend Information TS4/8GUSDHC6-P3 manual Csize, Eraseblken, Sectorsize, Wpgrpsize, Wpgrpenable

Page 17

TS4/8GUSDHC6-P3

4/8GB microSDHC Class 6 Card + Reader P3

 

 

 

C_SIZE

This field is expanded to 22 bits and can indicate up to 2 TBytes (It is the same as the maximum memory space specified by a 32-bit block address.)

This parameter is used to calculate the user data area capacity in the SD memory card (not include the protected area). The user data area capacity is calculated from C_SIZE as follows: memory capacity = (C_SIZE+1) * 512K byte

As the maximum capacity of the Physical Layer Specification Version 2.00 is 32 GB, the upper 6 bits of this field shall be set to 0.

ERASE_BLK_EN

This field is fixed to 1, which means the host can erase one or multiple units of 512 bytes.

SECTOR_SIZE

This field is fixed to 7Fh, which indicates 64 KBytes. This value does not relate to erase operation. Version 2.00 cards indicates memory boundary by AU size and this field should not be used.

WP_GRP_SIZE

This field is fixed to 00h. The High Capacity SD Memory Card does not support write protected groups.

WP_GRP_ENABLE

This field is fixed to 0. The High Capacity SD Memory Card does not support write protected groups.

R2W_FACTOR

This field is fixed to 2h, which indicates 4 multiples. Write timeout can be calculated by multiplying the read access time and R2W_FACTOR. However, the host should not use this factor and should use 250 ms for write timeout

WRITE_BL_LEN

This field is fixed to 9h, which indicates WRITE_BL_LEN=512 Byte.

WRITE_BL_PARTIAL

This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed.

FILE_FORMAT_GRP

This field is set to 0. Host should not use this field.

Transcend Information Inc.

17

Image 17
Contents Placement Description Features8GB microSDHC Class 6 Card + Reader P3 Pin DefinitionArchitecture Bus Signal Line Load Power Supply VoltageBus Operating Conditions General Current ConsumptionSingle card capacitance Parameter Symbol Min Max Unit Remark Bus Signal LevelsBus Timing Output Delay time during Data Transfer Mode Bus Timing High Speed Mode Output Hold time Reliability and Durability OCR register Register InformationOID MIDPNM PRVCRC PSNMDT CSD Register Fields CSD Version CsdstructureTranspeed TaacNsac Readbllen CCCReadblpartial WriteblkmisalignCsize WpgrpenableEraseblken SectorsizePermwriteprotect CopyTmpwriteprotect FileformatRCA Register Datastataftererase ScrstructureSdspec Sdbuswidths SdsecurityMechanical Description Top View Mechanical Description Bottom View Mechanical Description Keep Out Area MicroSD package Dimensions System Requirements Placement DimensionsDescription USB Pin Identification Block DiagramUSB Pinouts DC Electrical Characteristics of 3.3V I/O DC CharacteristicsRecommended Operating Conditions Parameter MIN