Doors /REAR Deck, Tweeter Adjustment | Phoenix Gold TI65CS, TI6CS

Component Speaker Owner’s Manual

BASIC INSTALLATION Selecting the placement of your new Ti Component speakers could be as easy as using the existing factory locations or may require you to create a new location. Speaker placement in the door, dash,

or rear deck is the most common. See your local Phoenix Gold Dealer for additional location and mounting assistance.

screws, (i.e. plastic, cardboard) use the pro vided speed clips which will act as a nut for the supplied screws.

4.Always provide water protection, if not supplied in the vehicle. We suggest using a rain shield or equivalent. If in doubt, please contact your Phoenix Gold Dealer.

DOORS /REAR DECK

1.Many vehicles already have factory locations (Figure 1) to house the “DROP IN” feature of the Ti Component speakers. If no existing locations are available or are not used, check the desired location for adequate cutout area and any depth obstructions. Make sure to allow sufficient clearance for window tracks, structural braces, trunk lid springs, etc.

2.Assuming enough area and depth is available, use the provided template and trace the speaker cutout and mounting holes onto the surface of the mounting location.

3.If the mounting surface is not structurally strong enough to accommodate

Figure 1

Mounting the speaker in a factory location.

TWEETER ADJUSTMENT

The tweeters pivot in their housings. When mounted low in the door, angle the tweeter up for better high frequency performance. In rear deck or dashboard installations, angle the tweeter away from the rear glass to reduce destructive reflections.

CROSSOVER ADJUSTMENT

The crossover provided with the Ti component set is optimized to give the most accurate in-car response. Use only the cross-over provided; the use of any other crossover may result in damage to one or more of the Ti series components.

SPEAKER INSTALLATION WITHOUT GRILL

Phoenix Gold has provided a foam mounting gasket. When installing your new component speakers in a factory location make sure to use the foam mounting gasket as shown in figure 1. For reverse mounted speakers place the foam gasket in front of the speaker. This will ensure an air tight seal for your Ti speakers.

For more custom applications, or cases where the factory grill will not be used, a high excursion protective grill has been provided. When installing your new component speakers with the provided Ti grill use figure 2. Make sure to use the rubber gasket to get an air tight seal.

Figure 2

Mounting the speaker in a custom application.

Connect the left amplifier output to the crossover for the left component set, and the right amplifier output to the crossover for the right component set. From there connect your component woofer and tweeters to the corresponding crossover observing polarity (+ to +, - to -). (figure 3)

CROSSOVER INSTALLATION

We suggest you select a mounting location for the crossovers within the cab of the vehicle, such as the kick panels or near the amplifier. If crossovers must be mounted in the door, mount them between the moisture barrier and the innermost door panel. MOISTURE DAMAGE WILL VOID YOUR WARRANTY.

TI6CS, TI65CS specifications

The Phoenix Gold TI65CS and TI6CS are high-performance car audio speakers designed to deliver superior sound quality and exceptional durability. Targeting audiophiles and casual listeners alike, these speakers come equipped with a range of cutting-edge technologies and features that enhance the listening experience.

One of the standout characteristics of the TI65CS and TI6CS is their construction. The speakers are built using a lightweight yet sturdy polypropylene cone, which ensures robust audio reproduction without compromising on clarity. This material is also resistant to moisture, making the speakers suitable for various environments, including those with high humidity levels.

Both models feature a unique silk dome tweeter that produces crisp highs and a wide frequency response range. This allows users to enjoy the subtle nuances in their music, from the delicate strumming of a guitar to the soaring highs of a symphony. The tweeter's design minimizes distortion, ensuring a clean sound that maintains fidelity even at high volumes.

The TI65CS is a coaxial speaker, incorporating a woofer and tweeter into one unit. This design not only saves space but also ensures that the frequencies are well integrated, providing a seamless audio experience. Meanwhile, the TI6CS takes a slightly different approach, offering a component speaker system that allows for even greater sound customization. The separate woofer and tweeter configuration enables better imaging and sound staging, allowing listeners to discern the location of instruments and vocals within their favorite tracks.

Another key feature of the TI series is the integrated crossover network. This technology efficiently divides the audio signal into designated frequency ranges, directing the appropriate sounds to the respective drivers. The result is a more balanced and rich audio presentation. Additionally, the adjustable crossover points allow users to tailor the sound to their preferences, accommodating different listening styles and music genres.

Durability is a crucial aspect of both the TI65CS and TI6CS. The speakers are designed to withstand the rigors of automotive use, including exposure to heat and vibrations. Their robust construction does not compromise sound quality, ensuring that performance remains consistent over time.

In summary, the Phoenix Gold TI65CS and TI6CS speakers stand out in the competitive car audio market. With their advanced materials, innovative technologies, and user-friendly features, these speakers promise exceptional sound quality, making them a worthy investment for anyone looking to enhance their auditory experience on the road. Whether you prefer the sleek design of the coaxial TI65CS or the customizable options of the component TI6CS, both models deliver an impressive listening experience that is sure to please.