MGE UPS Systems 700C, 1000C Transfer to battery power, Threshold for the low-battery warning

Page 18

3. Operation

3.3Operation on battery power (following failure of AC input power)

Transfer to battery power

1

2

bypass

The AC-power source is outside tolerances, LED 23 is ON, the buzzer beeps three times.

The equipment connected to the UPS is supplied by the battery.

22

Threshold for the low-battery warning

1

2

bypass

End of backup time

%

test

1

The low-battery warning threshold can be set by the user, with the "UPS Driver" software (see section 3.4).

LED 22 flashes.

The buzzer beeps every three seconds.

There is very little remaining battery backup time. Close all

22applications because UPS automatic shutdown is imminent.

The buzzer sounds continuously.

Press button 17 to turn the buzzer OFF.

17

The equipment is no longer supplied with power.

2

bypass

The UPS goes to sleep mode at the end of the battery backup time until complete shutdown due to tripping of the battery- protection function against deep discharge.

Return of AC input power:

If, in spite of the return of AC input power, the UPS does not restart, check that the automatic-restart function (activated by return of AC input power) has not been disabled (see section 3.4).

Page 18 - 51031604EN/AB

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Pulsar EXtreme Introduction Safety of persons SafetySafety rules Product safetyUsing this document ForewordPictograms Contents Maintenance Presentation Pulsar EXtreme rangeTower model Rack model Back Tower modelUSB Alarms Battery Load Remaining Control panelInstallation Unpacking and checks12 51031604EN/AB Installation of the rack version Connection to the RS 232 or USB communications port optional Installation of the communications-card option Connections Bargraph indications OperationStart-up All connected equipment is energisedEnd of backup time Transfer to battery powerThreshold for the low-battery warning Equipment connected to the UPS is supplied by the batteryPersonalisation optional Battery tabPersonalisable function Default setting Options FunctionOutput tab Connected equipment is no longer supplied with powerShutdown Bypass tabIndication MaintenanceTroubleshooting SignificationIndication Signification Correction Replacement of the battery module Safety rules24 51031604EN/AB UPS recycling at the end of service life EnvironmentTechnical characteristics Simplified diagram Operating conditionsAppendices Glossary UPS on / OFF via softwareIndex Connection

1000C, 700C specifications

MGE UPS Systems offers a robust range of Uninterruptible Power Supply (UPS) solutions, with two noteworthy models being the 700C and 1000C. These models are designed to provide reliable power protection for various applications, ensuring that critical equipment remains operational during power disturbances.

The MGE UPS Systems 700C features a power capacity of 700 VA, ideal for small servers and workstations. Its compact design allows it to fit seamlessly in both office and home environments. One of the main features of the 700C is its line-interactive technology, which offers enhanced power management capabilities without the need for a bulky setup. This model includes an LCD display that provides real-time information on battery status, load capacity, and utility power conditions, contributing to better monitoring and management of connected devices.

On the other hand, the MGE UPS Systems 1000C boasts a higher power capacity of 1000 VA, accommodating the needs of larger systems. This model also employs line-interactive technology and comes with an integrated automatic voltage regulation (AVR) feature. The AVR helps stabilize output voltage and ensures that connected equipment receives consistent power even when input voltage fluctuates. Additionally, the 1000C is equipped with multiple output sockets, allowing users to connect various devices simultaneously without compromising performance.

Both the 700C and 1000C utilize advanced battery technologies to enhance their overall reliability and life span. They support both sealed lead-acid and lithium-ion batteries, providing users with flexibility based on their specific requirements. Moreover, the hot-swappable battery feature ensures that batteries can be replaced without turning off the UPS, minimizing downtime for connected equipment.

A key characteristic of both models is their energy efficiency. With features designed to minimize power loss during operation, these UPS systems are not only cost-effective but also environmentally friendly. The MGE UPS Systems 700C and 1000C models provide users with peace of mind, knowing that their critical systems are safeguarded against power interruptions, voltage sags, and surges, ensuring continuous operation and data integrity. With their blend of innovative technology, efficiency, and ease of use, these UPS systems are perfect choices for both small and medium-sized businesses looking to protect their electronic assets.
Top Page Image Contents