APC Universal Transfer Switches UTS: Configuration for UTS6, UTS6H, UTS10BI

System Configuration and Setup

Once the UTS has been installed and connected to utility power by a qualified electrician, the UTS is ready for configuration and setup.

System setup

Press the System Setup button located on the front of the UTS to enter system setup mode and to navigate through the system setup options.

Use the down/up arrow buttons to navigate through the configuration options and to change values displayed on the LCD.

Note: The settings and values selected will change immediately after an arrow button is pressed.

The LCD will revert back to the starting display message after 30 seconds with no activity.

Bypass Mode

Use the up arrow key to select NO, indicating that bypass mode is disabled or YES, enabling bypass mode on the UTS.

In bypass mode, all circuits are powered by the utility power source. Backup power sources are not used to power loads regardless of the status or quality of the primary utility power source.

BYPASS LOAD.. NO

Warning: Changing bypass mode settings while connected to utility power will cause all connected loads to be momentarily disconnected.

When bypass mode is enabled, overload protection is provided. High and low voltage protection is not available when bypass mode is enabled.

Load Shedding

Use the down/up arrow keys to select ON, indicating that load shedding is enabled or OFF, to disable load shedding.

The UTS provides intelligent load management, defined by APC as adaptive load management (ALM).

LOAD SHEDDING ON/OFF: ON

When a backup power source is nearing an overload condition, ALM intelligence sheds (drops) select loads and then reconnects the loads when adequate power becomes available. ALM selects the most suitable loads to drop and reconnect at any given time minimizing overall load disruption, and maximizing backup power capability.

When load shedding is enabled (ALM is on), the average energy output of a backup power source can increase by 20% or more. This allows more loads to be connected without overloading or stalling a backup power source.

When load shedding is disabled (ALM is off), overload conditions can occur causing a generator to stall, a circuit breaker to trip, or loads may experience severe low voltage conditions.

Load Shedding must be enabled for each circuit to be set individually for specific maximum time off and minimum time on. Refer to Circuit Maximum Time Off and Minimum Time On section in this manual.

Voltage Sensitivity

Use the down/up arrow keys to select High, Medium, or Low voltage sensitivity. The voltage sensitivity level determines how the UTS reacts to voltage fluctuations. Medium voltage sensitivity setting is a suitable setting for most situations.

VOLTAGE SENSITIVITY: MEDIUM

High voltage sensitivity setting is recommended only for loads that are very sensitive to voltage fluctuations. Low voltage sensitivity setting is recommended for loads that can tolerate most power fluctuations.

Operation Manual Universal Transfer Switch UTS6 UTS6H UTS6BI UTS10BI

BU154A, UTS6H, UTS10BI, UTS6 specifications

The APC UTS6, UTS6H, UTS10BI, and BU154A are prominent products in the field of connectivity and power management, specifically designed to enhance the efficiency and reliability of electrical systems. Each of these models carries unique features and characteristics that cater to diverse applications in both residential and industrial environments.

The APC UTS6 is a highly versatile surge protector designed for home and office setups. It provides essential protection against voltage spikes and electrical surges, which can damage connected devices. The UTS6 features six outlets, allowing multiple devices to be connected simultaneously. It incorporates a built-in circuit breaker and LED indicators for surge protection status, ensuring that users are informed about the operational status of their equipment. Its compact design makes it ideal for tight spaces, and its robust construction ensures long-term durability.

The UTS6H is an enhanced version of the UTS6, tailored specifically for high-capacity devices. This model is particularly useful for areas where high power consumption is a concern, such as data centers or server rooms. With its rugged design, the UTS6H features advanced surge suppression technology and can handle higher current loads without compromising safety. It also includes additional outlets and USB charging ports for added convenience, making it an indispensable tool for users with multiple electronic devices.

Moving on to the UTS10BI, this unit is designed for advanced users needing superior protection and versatility. It boasts ten outlets and features advanced filtering technologies to eliminate electrical noise, ensuring stable power delivery to sensitive equipment. The UTS10BI also includes smart technologies, such as energy monitoring, which helps users track power consumption and optimize energy usage. Additionally, it is equipped with safety features such as child-proof outlets and surge protection status indicators.

Lastly, the BU154A is a compact power management solution geared towards both commercial and residential users. It features a slim design that is easily mountable in various settings. With multiple outlets and the ability to accommodate larger plugs, the BU154A provides flexibility in connecting different devices. Its built-in surge protection safeguards connected electronics from voltage fluctuations, while its thermal protection feature prevents overheating. This unit is ideal for users seeking efficient power management without taking up too much space.

In summary, the APC UTS6, UTS6H, UTS10BI, and BU154A are innovative solutions designed to address specific user needs in power management and surge protection. Each model combines advanced technology, a range of features, and robust safety mechanisms to ensure reliable performance and protection of electronic devices in various environments.