APC UTS10BI, UTS6H Time Management, Reset Energy Meter, System Test, Backup1 Source Type

Page 9
GEN POWER RATING: 0-12000 WATTS

Time Management

Use the up arrow key to select On indicating that time management is enabled or Off to disable time management.

Time management is used with load shedding to ensure loads receive adequate power over extended periods of time.

TIME MANAGEMENT: ON

Time Management must be enabled for each circuit to be set individually for specific maximum time off and minimum time on. Refer to Circuit Maximum Time Off and Minimum Time On section in this manual.

Reset Energy Meter

This feature allows the user to reset to zero, the total number of kilowatt hours used collectively by the circuits connected to the UTS. Refer to Circuit Configuration and Setup in this manual.

RESET ENERGY METER: NO

System Test

Setting the System Test to YES initiates a system self-test to check UTS operation. Use the down/up arrow keys to initiate a system self-test.

System Test does not function when the UTS is set up for a manual start generator. Refer to Generator Start Mode in this manual for details.

SYSTEM TEST: NO

Backup1 Source Type

The factory default setting is GENERATOR. The generator inlet located on the front of the UTS provides connectivity for a backup power source. The system setup has three options for backup power:

•Generator

•UPS

BACKUP1 SOURCE TYPE: GENERATOR

• Other

Use the down/up arrow keys to select the preferred backup power source. Use the down/up arrow keys to select the preferred backup power source. APC recommends the use of a generator for BACKUP1.

Backup1 (Generator) Power Rating

Use the down/up arrow keys to set the correct power rating for the backup power source connected to the UTS.

There are three levels for rapid rating increment changes. Press and hold the down or up arrow key to adjust the power rating and to move through the three levels

described here. To revert back to level 1 release the down arrow key then press and hold the down arrow key. Level 1 increases or decreases the rating by 5 Watts.

Level 2 increases or decreases the rating by 10 Watts. Level 3 increases or decreases the rating by 100 Watts.

Generator Surge Overload Time

Use the down/up arrow keys to set the desired ALM response time.

When power output exceeds the pre-set power rating for the Backup1 Source (see Generator Power Rating above), this feature determines the time it will take for ALM to respond and activate load shedding process.

GEN SRGE OVRLD TIME: 0-600 SEC

Low generator surge overload time settings decrease the possibility of a generator overload condition while increasing the possibility that ALM will activate load shedding.

High generator surge overload time settings increase the possibility of a generator overload condition while decreasing the possibility the ALM will activate load shedding.

Inverter generators must be set at 0 seconds.

8

Operation Manual Universal Transfer Switch UTS6 UTS6H UTS6BI UTS10BI

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Universal Transfer Switch Introduction About this productProtect your investment Safety Precautions Safety and Regulatory Information save this informationUTS Configurable Features UTS Controls and Indicators LCDUPS UTS circuit LED configurations UTS Power ConnectorsGenerator Inlet Guide UPS InletUtility PHASE1 Utility PHASE2 System Load 2400W System Status VerificationUTS FW VER UI FW VER System setup System Configuration and SetupBypass Mode Load SheddingBackup1 Source Type Reset Energy MeterBackup1 Generator Power Rating Time ManagementGenerator Start Mode Backup2 Source TypeBACKUP2 Source Type Circuit Status Verification Circuit Configuration and SetupSetup Option 1-Circuit Load Type Circuit setup optionsSetup Option 2-Source Delayable CircuitsCircuit Security Mode Circuit Maximum Time Off and Minimum Time OnCircuit Amp Rating Severe low voltage conditions TroubleshootingProblem The LCD displays the message Backup2 Power Source is setRating requires the services of a qualified electrician Requires the services of a qualified electricianAPC Worldwide Customer Support ServiceRegulatory Information Radio Frequency WarningsTerms of warranty Two-Year Warranty990-2993C 2010
Related manuals
Manual 30 pages 5.68 Kb

BU154A, UTS6H, UTS10BI, UTS6 specifications

The APC UTS6, UTS6H, UTS10BI, and BU154A are prominent products in the field of connectivity and power management, specifically designed to enhance the efficiency and reliability of electrical systems. Each of these models carries unique features and characteristics that cater to diverse applications in both residential and industrial environments.

The APC UTS6 is a highly versatile surge protector designed for home and office setups. It provides essential protection against voltage spikes and electrical surges, which can damage connected devices. The UTS6 features six outlets, allowing multiple devices to be connected simultaneously. It incorporates a built-in circuit breaker and LED indicators for surge protection status, ensuring that users are informed about the operational status of their equipment. Its compact design makes it ideal for tight spaces, and its robust construction ensures long-term durability.

The UTS6H is an enhanced version of the UTS6, tailored specifically for high-capacity devices. This model is particularly useful for areas where high power consumption is a concern, such as data centers or server rooms. With its rugged design, the UTS6H features advanced surge suppression technology and can handle higher current loads without compromising safety. It also includes additional outlets and USB charging ports for added convenience, making it an indispensable tool for users with multiple electronic devices.

Moving on to the UTS10BI, this unit is designed for advanced users needing superior protection and versatility. It boasts ten outlets and features advanced filtering technologies to eliminate electrical noise, ensuring stable power delivery to sensitive equipment. The UTS10BI also includes smart technologies, such as energy monitoring, which helps users track power consumption and optimize energy usage. Additionally, it is equipped with safety features such as child-proof outlets and surge protection status indicators.

Lastly, the BU154A is a compact power management solution geared towards both commercial and residential users. It features a slim design that is easily mountable in various settings. With multiple outlets and the ability to accommodate larger plugs, the BU154A provides flexibility in connecting different devices. Its built-in surge protection safeguards connected electronics from voltage fluctuations, while its thermal protection feature prevents overheating. This unit is ideal for users seeking efficient power management without taking up too much space.

In summary, the APC UTS6, UTS6H, UTS10BI, and BU154A are innovative solutions designed to address specific user needs in power management and surge protection. Each model combines advanced technology, a range of features, and robust safety mechanisms to ensure reliable performance and protection of electronic devices in various environments.
Top Page Image Contents