American Power Conversion DP300E series Connection, LED descriptions, State Description

5

Connection continued

LED descriptions

LED	State	Description
		The device that connects
		the card to the network (a
	Off	router, hub, or
Management Card		concentrator) is off or not
Link- RX/TX		operating correctly.
	Flashing	The card is receiving data
	green	packets from the network.
	Off	The card has no power.
	Solid green	The card has valid network
		settings.
	Flashing	The card does not have
	green	valid network settings.
Management Card
	Solid red	The card has detected a
Status		hardware failure.
		The card is making		BOOTP
		requests. The Status		LED
	Blinking red	must be blinking red for the
		Wizard configuration
		software to detect that the
		card does not have valid
		network settings.
	Off	The chassis is not receiving
		power.
		The chassis has not been
	Blinking	configured. See
	quickly	“Configuring via the
	(5 times per	Monitoring Port” on page
Triple Chassis	second)	10 of the Silcon Triple
		Chassis user manual.
Status
	Blinking	The chassis is powered on
	slowly	but is not communicating
	(1 time per	with the	UPS .
	second)
	On	The chassis is operating
		normally.