Installation

Installation options

Placing on a desktop

Mounting in an enclosure

You can install the Silcon Triple Chassis in one of three ways. It can be:

•placed on a desktop

•mounted in a NetShelter enclosure or other 19" rack

•mounted on a wall

1Choose a permanent location for the chassis. Make sure that the rear panel of the chassis is accessible.

Note:	We recommend that you not place the chassis on top of
	the UPS	to ensure proper airflow to the	UPS	.

2 Continue with “Connecting the chassis” on page 4.

1Remove the rubber feet from the bottom of the chassis.

2Fasten each rack-mount bracket (supplied) to the chassis as shown, using the two flat head mounting screws (supplied) and a #2 Phillips screwdriver.

Note: The mounting brackets attach at various hole positions on the side of the chassis. Choose a position that will prevent connected cables from being pinched by the door. If more than two mounting holes are aligned, use the pairs that are the farthest apart.

3Attach the assembly to the rack using four caged nuts and mounting screws supplied with your NetShelter enclosure. (See the figure on the next page.)

Note : Refer to the user documentation supplied with your enclosure or rack for more detailed mounting instructions.

Continued on next page

Installation

the UPS

to ensure proper airflow to the