Features

Line-R®

• Connect Your Equipment

	Automatic Voltage Regulator
www.apc.com	Model LE300
www.apc.com

Thank you for purchasing APC’s Line-R Automatic Voltage Regulator! Please fill out and mail the product warranty registration form, or fill out an online form at www.apc.com.

Chronically abnormal line voltage is often the result of adjustments made to the power station to conserve energy, or to compensate for low voltages in other areas. Locally, the operation of heavy loads such as air conditioners, office copiers, and laser printers may cause temporary voltage fluctuations.

The Line-R is a high-performance, microprocessor-controlled tap changing device which automatically corrects brownouts (by boosting low voltage) and overvoltages (by stepping down high voltage) from the power utility service to levels that are safe for computers, as well as other sensitive equipment. APC’s Line-R provides the highest degree of protection from line voltage sags and swells, and has been designed for many years of reliable, maintenance-free service.

Please Read This Manual

This manual provides safety, installation and operation instructions that, when followed, will ensure the fullest performance and service life that the Line-R can provide. Please save this manual. It includes important instructions for the safe use of this product, as well as information necessary to obtain factory service, if necessary.

Applications

CAUTION: The total power consumption of all equipment plugged into the Line-R must not exceed 300 W or 300VA. A total load in excess of 300 W or 300 VA will cause the fuse to fault (blow).

The Line-R is designed for use with voltage sensitive equipment such as: a home computer, monitor, inkjet printer, scanner or fax. It is also designed for use with home electronics equipment such as televisions, stereos, CD players, VCRs, and DVD players, data processing equipment, modems, typewriters, calculators, and telephone equipment.

Lights when the Line-R is regulating above normal input voltage and the input voltage is within the normal input voltage range.

Flashes when the Line-R is regulating above normal input voltage and the input voltage is out of the input voltage range.

Lights when the input voltage is normal.

Lights when the Line-R is regulating below normal input voltage and the input voltage is within the normal input voltage range.

Flashes when the Line-R is regulating below normal input voltage and the input voltage is lower than the input voltage range.

AC Outlets (4)

(connect equipment here)

AC Plug

(to wall outlet)

ON/OFF

Switch

Fuse Holder

Plug equipment into the Line-R rear-panel outlets and switch the equipment ON. The equipment will not be powered until the Line-R is switched ON.

CAUTION: The total power consumption of all equipment plugged into the Line-R must not exceed 300 W or 300 VA. A total load in excess of 300 W or 300 VA will cause the fuse to fault (blow).

CAUTION: Do not plug an LE300 into a 220 volt outlet as this may damage the unit or the connected equipment.

Switch ON the Line-R

Switch the Line-R ON by pressing the front panel ON/OFF switch to the ON (l) position. This switch may be used as the master ON/OFF switch for all equipment connected to the unit.

Specifications

Characteristics	Model LE300
Maximum Output Power Capacity	300 W or 300 VA
Voltage Type	Monovolt
Nominal Output Voltage	115V +6%
Nominal Input Current	2.6 A
Input Voltage Range	93 - 132 V
Surge Energy	450 Joules
Output Regulation	+6%
Response Time	<3 AC Cycles
Efficiency	>93%
Nominal Frequency	60 Hz
Total Harmonic Distortion	<1.5%
Number of Outlets	4
Fuse 1 (for 115 volt operation)	250V, 3.2 Amp, Slo-Blo Type
	(.25 x 1.25 in.
	6.35 x 31.75 mm)

Appliances not suitable for use with the Line-R are items such as refrigerators, freezers, power tools, air conditioners, dehumidifiers, blenders, or any device that employs an AC motor for operation. Not for use with small fuel generators. Also excluded are life sustaining equipment and any device with a power requirement of 300 W or 300 VA.

When using the Line-R with an Uninterruptible Power Supply (UPS), connect the UPS to the Line-R’s output, then connect the Line-R to the wall outlet.

Transformer

Note: Monovolt Unit has 1 Fuse HolderBlock Outlet

Bivolt Unit has 2 Fuse Holders

Installation

• Inspection

Remove the Line-R from the shipping container and inspect it for damage that may have occurred in transit. Notify the carrier and place of purchase if any damage is found. The packing materials are made of recyclable materials and should be saved for reuse or be disposed of properly.

• Placement















Operating Temperature	0 - 40°C (32 - 104°F)

Relative Humidity	0 - 95% Non-condensing

Dimensions	118 x 214 x 141 mm (4.6 x 8.4 x 5.5 inches)

Weight	2.0 kg (4.4 lb.)

Limited Warranty

American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of one year from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its sole option, any such defective products. To obtain service under

Fuse Replacement

For safety purposes, the Line-R provides a user- replaceable fuse to protect the unit from being overloaded. See the Specifications table for replacement fuse rating. Replace a faulted fuse with a fuse of the same exact type and rating.

CAUTION: Unplug the Line-R from the wall outlet before replacing the fuse.

Fuse Install

Remove

Fuse

Holder

Polarization Standard

In order to comply with all installation practices and standards, as well as to avoid the risk of electrical shock, the Line-R must be connected in places having proper grounding. The network phase conductors where your equipment will be connected must be protected by fuses or circuit breakers, and it must be bipolar if used in a biphase network.

N(F*)

Please install the Line-R in a protected environment.

Do not block the top or side air vents on the unit. Allow 2.5 cm (1 inch) minimum vent clearance.

2.5 cm (1 inch)

Do not operate the Line-R in an environment where the ambient temperature or humidity is outside the limits listed in the Specifications section of this manual. Operate the Line-R in an environment free of excessive dust, mechanical vibration, inflammable gases and explosive or corrosive atmospheres.

• Plug the Line-R into Wall Outlet

Plug the Line-R (LE300) into a 115 volt AC wall outlet.

warranty you must obtain a Return Material Authorization (RMA) number from APC or an APC service center. Products must be returned to APC or an APC service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies to the original purchaser who must have proper registered the product within 10 days of purchase.

EXCEPT AS PROVIDED HEREIN, AMERICAN POWER CONVERSION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some countries do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT SHALL APC BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, APC is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. This warranty gives you specific legal rights and you may also have other rights which may vary from location to location.

Contact Information

Technical Support	http://www.apc.com/support
Internet	http://www.apc.com
USA / Canada	1.800.800.4272
Mexico	292.0253 / 292.0255
Brazil	0800.12.72.1
Worldwide	+1.401.789.5735