American Power Conversion SYTF3 Unpacking, Installing the Step-Down Transformer, Inspection

Page 12

CHAPTER 3: INSTALLATION

Unpacking

The Step-Down Transformer is packaged in a robust shipping carton. Carefully remove the package contents. The packaging is recyclable; save it for reuse or dispose of it properly.

Inspection

Inspect the equipment upon receipt. APC has designed robust packaging for your product. However, accidents and damage may occur during shipment. Notify the carrier and dealer if there is damage or missing equipment.

Contents

Check the packaging contents. The shipping package contains the Step-Down Transformer, mounting rails, and mounting hardware. Your package may contain a Bezel Kit. If the bezel is not already installed, snap it on to the UPS as instructed below.

Installing the Step-Down Transformer

This section provides information on the steps required to install and connect the Step-Down Transformer.

Installing in a Four-Post Rack

Follow the instructions contained in the Addendum SU Rack-Mount Rails 2U-5Usheet (990-7034G) to mount the rails in your NetShelter or 19 in (46.5 cm) rack.

*It is recommended that the Step-Down Transformer is installed directly above the UPS in the rack.

Figure 8: AP9621 / SURT005 / SURT006

Figure 9: SUTF3 / SYTF2 / SYTF2J / SYTF3 / SYTF3J

1.Install the mounting rails using the instructions contained in the Rail Kit.

2.Slide the Step-Down Transformer frame into the rack.

The Step-Down Transformer is heavy.

Three people must support the unit.

3.To secure the Step-Down Transformer frame in the rack, screw the four decorative screws through the holes in the ears of the UPS and into the screw clips.

4.If the bezel has not already been attached, align the tabs on the sides of the bezel with the slots on the front of the Step-Down Transformer and gently snap it into place.

Install the bezel with the rear fins facing down.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents APC Step-Down Transformer Page Basics Table of Contents Handling Safety Conventions Used in this ManualDe-energizing Safety Electrical SafetyRegulatory Agency Approvals Limited Warranty Life Support PolicyCopyright and Trademark Information Safety and General Information About Your Step-Down Transformer VACProduct Overview Front View Component Identification Rear View Component IdentificationInstalling the Step-Down Transformer ContentsInstalling in a Four-Post Rack UnpackingWiring the Step-Down Transformer Connecting Load Equipment Turning On the Step-Down TransformerUsing the Step-Down Transformer Product Specifications SYTF3 / SURT005Other Specifications

SYTF3, SYTF3J, SYTF2, SURT005, AP9621 specifications

American Power Conversion (APC) has built a formidable reputation in the field of power protection and management solutions, with a portfolio that includes a diverse range of Uninterruptible Power Supplies (UPS). Among those, the SURT006, SURT005, SYTF2, SYTF2J, and SYTF3 units stand out due to their exceptional features and advanced technologies.

The APC SURT006 and SURT005 are part of the Smart-UPS On-Line series. They are designed for high-demand applications, providing robust power backup and conditioning. The SURT006, featuring a capacity of 6 kVA, delivers reliable power for critical hardware, ensuring continuity during outages. Similarly, the SURT005 with a 5 kVA rating serves smaller setups efficiently. Both models utilize double-conversion technology, meaning they convert incoming AC power to DC, and then back to AC. This process guarantees that devices are supplied with clean and stable power, free from surges, sags, and noise.

Equipped with an intelligent control system, these UPS units offer scalable runtime and connectivity options. They feature an advanced LCD interface that provides real-time monitoring of power conditions, battery status, and system functions. The ability to configure settings via the user-friendly display simplifies management in diverse environments.

The SYTF2, SYTF2J, and SYTF3 models cater to different operational needs and environments. These units are designed with network administrators in mind, offering seamless support for data centers, voice and data applications, and complex IT systems. The SYTF series benefits from hot-swappable batteries, which ensure that maintenance can be conducted without disrupting operations. Furthermore, advanced thermal management and intelligent fan control improve efficiency while prolonging battery life.

A common feature across the SYTF series is their integration with software for power management and monitoring. This provides valuable insights into energy consumption, battery health, and overall system performance, empowering users to make data-driven decisions. The models are also compatible with APC's award-winning PowerChute management software, enhancing the capabilities of the UPS by allowing remote monitoring and configuration.

The APC SURT006, SURT005, SYTF2, SYTF2J, and SYTF3 are exemplary solutions for businesses requiring uninterrupted power supply and stringent power quality standards. With features like robust battery management, surge protection, and intelligent control systems, they meet the rigorous demands of modern critical infrastructure. These UPS solutions stand ready to support any environment, ensuring that businesses maintain operational uptime and efficiency.
Top Page Image Contents