American Power Conversion AP9210 manual Auto Power On, Master Outlet Configuration and Control

20		20
	MasterSwitch 100V – User Guide

Auto Power On

The Auto Power On selection allows the user to configure the receptacle to power-up and reboot independently or with the master:

--- Auto Power On -----------------------------

1- With Master

2- 15 Sec After Master

3- 30 Sec After Master

4- 45 Sec After Master

5- 1 Min After Master

6- 2 Min After Master

7- 5 Min After Master

8- Never

<ENTER> Redisplay Menu

<ESC> Return To Previous Menu

Figure 7: Auto Power On Submenu

Select one of the settings. Selecting “With Master” indicates that user-selected settings for the master outlet will also apply to this outlet. For more discussion of the master outlet, see below.

Master Outlet Configuration and Control

From the Outlets Manager submenu (see Figure 3), Option 9 allows the user to configure/control master settings to apply to all outlets whose Auto Power On settings are set to “With Master.” To perform an action on all outlets assigned to the master outlet, select Option 1 from the Outlets Manager submenu shown in Figure 3. The following submenu appears:

---- Control of	Master Outlet	-----------------------------------------------
Outlet	Device Name	Auto Power On	Reboot Duration
---------------------------------------------------------------------
1:ON	Device 1	With Master	Same as Master
2:ON	Device 2	With Master	Same as Master
3:ON	Device 3	With Master	Same as Master
4:ON	Device 4	With Master	Same as Master
5:ON	Device 5	With Master	Same as Master
6:ON	Device 6	With Master	Same as Master
7:ON	Device 7	With Master	Same as Master
8:ON	Device 8	With Master	Same as Master
Master	PDU	Immediate	5 Seconds

1- Immediate All On

2- Immediate All Off

3- Sequence All On

4- Immediate Reboot

5- Sequenced Reboot

?- Help

<ENTER> Redisplay Menu

<ESC> Return To Previous Menu

Figure 8: Master Control Menu