14 |
|
|
| 14 |
| MasterSwitch 100V – User Guide |
| ||
|
|
|
|
|
|
|
|
|
|
Reboot Duration
You can use Web, SNMP or console configuration commands to define how long a delay will occur between the power being turned off at the start of a reboot and the power being turned back on to complete the reboot. This delay, which applies to the reboot activity at all outlets, allows you to ensure that the MasterSwitch is configured for a delay that meets the need of any device that is connected to any of the MasterSwitch outlets.
The allowable reboot on/off delay values are:
rWait 5 seconds between off/on
rWait 10 seconds between off/on
rWait 15 seconds between off/on
rWait 20 seconds between off/on
rWait 30 seconds between off/on
rWait 45 seconds between off/on
rWait 60 seconds (1 minute) between off/on
MasterSwitch Device Name
You can use Web, SNMP or console configuration commands to define a name for the MasterSwitch, as a whole. This name can be up to 20 characters in length.
Outlet Device Name
You can use Web, SNMP or console configuration commands to define a name for each of eight MasterSwitch outlets. These names can each be up to 20 characters in length.
URL Links
You can use the embedded Web control, only, to defineURL links:
For example:
nYou can define links to other world wide Web pages.
nYou can define the Device URL: value in each of the Web control’s Outlet Configuration pages to connect you to the worldwide Web home page for the manufacturer of the device that connects to a specific outlet whenever you click on the link symbol for that outlet’s device.
Note: The embedded Web control feature comes with