American Power Conversion AP9210 manual MasterSwitchV1 OIDs, Identification sPDUIdent OIDs

29		29
	MasterSwitch 100V – User Guide

MasterSwitchV1 OIDs

When you select the MasterSwitchV1 listing, the SNMP browser will present you with five categories of OIDs:

nMasterSwitch-MIBidentification (sPDUIdent) OIDs

nMasterSwitch-MIBmaster control (sPDUMasterControl) OIDs

nMasterSwitch-MIBmaster configuration (sPDUMasterConfig) OIDs

nMasterSwitch-MIBoutlet control (sPDUOutletControl) OIDs

nMasterSwitch-MIBoutlet configuration (sPDUOutletConfig) OIDs

Identification (sPDUIdent) OIDs

Five sPDUIdent OIDs, all read-only, allow you to access the following self-explanatory information about the MasterSwitch:

nsPDUHardwareRev

nsPDUFirmwareRev

nsPDUDateOfManufacture

nsPDUIdentModelNumber

nsPDUIdentSerialNumber

Master Control (sPDUMasterControl) OIDs

There are three sPDUMasterControl OIDs:

nsPDUMasterState, a read-only OID, allows you find out the current status of all eight outlets.

nsPDUMasterPending, a read-only OID, allows you to find out if any of the outlets have commands pending.

nsPDUMasterControlSwitch allows you to reboot all outlets, turn all outlets on or turn all outlets off by setting one of the following values to this OID:

q turnAllOnNow

q turnAllOnSequence q turnAllOffNow

q rebootAllNow

q rebootAllSequence