American Power Conversion AP9222EXP manual Managing MasterSwitch VM, Management Interfaces

Page 15

MasterSwitch VM

Managing MasterSwitch VM

Management Interfaces

Overview	After you have configured MasterSwitch VM with the proper network
	settings (see Initial setup on page 4), you can manage MasterSwitch VM
	remotely through its Web, Control Console, and SNMP interfaces.You
	can also manage locally on the Control Console through a serial
	connection. Only one user at a time can access MasterSwitch VM.
	Serial connections (using a terminal emulator) have precedence over
	Telnet users, and Telnet users have precedence over Web users.
Web interface	To access and log on to the MasterSwitch VM unit’s Web interface
	perform these steps:
	In the URL Location field, do one of the following:
	•	If the MasterSwitch VM unit’s Web port is set to the default
		value of 80, type http:// followed by the MasterSwitch VM
		unit’s IP address. The following example shows a typical IP
		address:
		http://170.241.17.51
	•	If the MasterSwitch VM Web port is set to a value other than the
		default of 80, enter the System IP address (the IP address of the
		MasterSwitch VM unit) followed by a colon and the configured
		Web Port value (8000 in the following example):
		http://170.241.17.51:8000
	•	You can also enter the DNS name—this requires a DNS server
		entry for the MasterSwitch VM unit. See the example below:
		http://MasterSwitchVM25
	Respond to the username and password prompts. The default
	Administrator user name and password are both apc, all lowercase.
	Note:	You can change the user name, password, and time-out values
		in the System menu. See User Manager on page 23 and Outlet
		User Manager on page 24 for more information.
	Note:	Some Web interface features (data verification, APC Interactive
		Assistant, and MD5 authentication) require that you enable

JavaScript and/or Java. In order for MD5 to function properly you must also have cookies enabled on your Web browser.

Continued on next page

MasterSwitch VM User’s Guide

10

Image 15

Contents MasterSwitch VM Thank You Contents MasterSwitch VMContents Life-Support Policy Warranty InformationTroubleshooting SpecificationsFeature Description IntroductionProduct Description Introduction MasterSwitch VM ControllerStatus Description LEDsOperating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Overload Warning and the load exceeds the Overload Warning Outlets do not turn on when the Overload WarningOutlets always turn on Threshold has been exceededManagement Interfaces Managing MasterSwitch VMTelnet, for remote management Managing MasterSwitch VMControl Console InterfaceManaging MasterSwitch VM Outlets and menu Password-Protected AccountsAccount access to Account, and up to 16 Outlet User accountsOutlets Menu ItemsOutlets Menu ItemsUnit Configuration MasterSwitch VMOutlet Configuration Links Event Log Interface or by pressing C TRL + L in the Control ConsoleDir. You will see a listing similar to the following ftpdir However, you may need to select a four-digit date format MasterSwitch VM unit always uses four-digit yearRepresentation when logging and displaying event data Similar to the followingTCP/IP NetworkSnmp Access Control Telnet/WebDefinition Trap Receiver IP to Snmp Trap ReceiverSystem User ManagerItems Outlet User ManagerFor Outlet User Manager Identification Date/TimeFile Transfer Tools Enable BootpHelp Security Security FeaturesSecurity AuthenticationMethods Interface Security AccessProduct Information Warranty InformationProduct Information TroubleshootingLife-Support Policy Product SpecificationsFollowing table shows the product specifications for MasterSwitch VM power distribution unit AP9222AP9221NX166 MasterSwitch VM Controller AP9221NX166Index Help FeaturesIndex Regional centers APC Worldwide Customer Support