American Power Conversion AP9222EXP manual Telnet/Web, Snmp Access Control, Definition

Page 26

Item

Definition

Telnet

 

 

 

Access

Enables or Disables Telnet Access.

 

 

 

The TCP/IP port where the Telnet server for the MasterSwitch VM

Port

unit is located.

 

Default: port 23

 

 

Web

 

 

 

Access

Enables or Disables Web Access.

 

 

 

The TCP/IP port where the Web server for the MasterSwitch VM

Port

unit is located.

 

Default: port 80

 

 

SNMP

.

 

 

 

 

Item

Definition

 

 

 

 

 

 

SNMP Access

Enables or disables SNMP access.

 

 

 

 

 

 

Access Control

Controls access to each of the four SNMP channels.

 

 

 

 

 

 

Trap Receiver

Defines the NMSs (up to 4) to which traps are sent.

 

 

 

 

SNMP: Access Control

Item

 

Definition

 

 

Community

The password that the NMS (identified by the NMS IP option) must use

for SNMP access to MasterSwitch VM. The allowed access type is

Name

defined by the Access Type option (15 characters maximum).

 

 

 

 

Limits access to the NMS or NMSs specified. You specify the value as a

 

specific IP address for one NMS or as an IP address filter for multiple IP

 

addresses. For example:

 

 

159.215.12.1 allows only the NMS with the specific IP address of

NMS IP

159.215.12.1 to have access.

159.215.12.255 allows access for any NMS on the 159.215.12

 

 

segment.

 

 

159.215.255.255 allows access for any NMS on the 159.215 segment.

 

159.255.255.255 allows access for any NMS on the 159 segment.

 

0.0.0.0 or 255.255.255.255 allows access for any NMS.

 

 

 

Access

Defines whether an NMS

(identified by the NMS IP option) has Write

access (can GETs and SETs), has Read access (can only GETs), or is

Type

Disabled (cannot use GETs or SETs).

 

 

 

 

Continued on next page

MasterSwitch VM User’s Guide

21

Image 26
Contents MasterSwitch VM Thank You MasterSwitch VM ContentsContents Specifications Warranty InformationTroubleshooting Life-Support PolicyProduct Description Feature DescriptionIntroduction MasterSwitch VM Controller IntroductionLEDs Status DescriptionOperating MasterSwitch VM Configuring outlets for operation Is turned on When these two delays expire, the outlet will be turned on Outlet will be turned on Threshold has been exceeded Outlets do not turn on when the Overload WarningOutlets always turn on Overload Warning and the load exceeds the Overload WarningManaging MasterSwitch VM Management InterfacesInterface Managing MasterSwitch VMControl Console Telnet, for remote managementManaging MasterSwitch VM Account, and up to 16 Outlet User accounts Password-Protected AccountsAccount access to Outlets and menuMenu Items OutletsMenu Items OutletsMasterSwitch VM Unit ConfigurationOutlet Configuration Links Dir. You will see a listing similar to the following ftpdir Event LogInterface or by pressing C TRL + L in the Control Console Similar to the following MasterSwitch VM unit always uses four-digit yearRepresentation when logging and displaying event data However, you may need to select a four-digit date formatNetwork TCP/IPDefinition Snmp Access ControlTelnet/Web Snmp Trap Receiver Trap Receiver IP toItems SystemUser Manager For Outlet User Manager Outlet UserManager File Transfer IdentificationDate/Time Enable Bootp ToolsHelp Security Features SecurityAuthentication SecurityInterface Security Access MethodsWarranty Information Product InformationTroubleshooting Product InformationLife-Support Policy MasterSwitch VM power distribution unit AP9222 SpecificationsFollowing table shows the product specifications for ProductMasterSwitch VM Controller AP9221NX166 AP9221NX166Help Features IndexIndex APC Worldwide Customer Support Regional centers