Operation
Battery LED
The battery LED is located on the front bezel of the XLBP. During normal operation the LED is not illuminated.
On
LED Activity | Possible Cause |
|
|
XLBP LED illuminates briefly |
|
|
|
~ On | Normal operation |
and blink within the first minute. |
|
~ The XLBP is establishing communication |
|
with other components of the system. |
|
~ The XLBP is conducting a normal periodic |
|
self test |
|
|
|
XLBP LED remains illuminated after | |
|
|
XLBP LED is blinking slowly | One or more battery modules are not connected |
(one blink per second). |
|
|
|
XLBP LED is blinking rapidly | A communication fault exists, check cable connections |
(three blinks per second). |
|
|
|
The XLBP LED remains illuminated. | ~ A potential hardware fault exists contact APC, refer to the Service |
| section in this manual |
|
|
Battery module and pair identification
The PowerView will reference XLBP configuration in the following manner.
External Battery Pack
BattPair_1 | BattPair_2 | ||
Module_1 | Module_2 | Module_3 | Module_4 |
BattPair_3 | BattPair_4 | ||
Module_5 | Module_6 | Module_7 | Module_8 |
8 | SURT192RMXLBP2/SURT192XLBP2 6U User Manual |