American Power Conversion 990-2485 Maintenance and Service Information, Replace battery modules

Page 9

Maintenance and Service Information

Replace battery modules

This unit has easy-to-replace, hot-swappable battery modules. Replacement is a safe procedure, isolated from electrical hazards. You may leave the unit and connected equipment on during the replacement procedure.

Once the batteries are disconnected the connected equipment is not protected from power outages.

Refer to the appropriate replacement battery user manual for battery module installation instructions. See your dealer or contact APC at www.apc.com for information on replacement battery modules.

Be sure to deliver the spent battery(s) to a recycling facility or ship it to APC in the replacement battery packing material.

Service

If the unit requires service do not return it to the dealer. Follow these steps:

1.Contact APC Customer Support through the APC Web site, www.apc.com.

Note the model number of the unit, the serial number located on the back of the unit, and the date purchased. If you call APC Customer Support, a technician will ask you to describe the problem and attempt to solve it over the phone. If this is not possible, the technician will issue a Returned Material Authorization Number (RMA#).

If the unit is under warranty, repairs are free.

Procedures for servicing or returning products may vary internationally. Refer to the APC Web site for country specific instructions.

2.Pack the unit in its original packaging. If this is not available:

Pack the unit carefully to avoid damage in transit. Never use Styrofoam beads for packaging.

Damage sustained in transit is not covered under warranty.

3.Always DISCONNECT THE BATTERY(s) before shipping in compliance with U.S. Department of Transportation (DOT) and IATA regulations. The battery(s) may remain in the unit.

4.Mark the RMA# on the outside of the package.

5.Return the unit by insured, prepaid carrier to the address given to you by Customer Support.

APC Worldwide Customer Support

Customer support for this or any other APC product is available at no charge in any of the following ways:

Refer to the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests.

www.apc.com (Corporate Headquarters)

Connect to localized APC Web sites for specific countries, each of which provides customer support information.

www.apc.com/support/

Global support searching APC Knowledge Base and using e-support.

Contact an APC Customer Support center by telephone or e-mail. Local, country-specific centers:

go to www.apc.com/support/contact for information.

Contact the APC representative or other distributor from whom you purchased your APC product for information on how to obtain local customer support.

SURT192RMXLBP2/SURT192XLBP2 6U User Manual

9

Image 9
Contents APC Smart-UPS→XL Page Unpack package contents IntroductionAbout this unit Specifications Environmental SpecificationsPhysical Specifications Installation Stack configurationRack-mount configuration Install units in rack Connect UPS and XLBPs Battery module and pair identification Battery LEDOperation LED Activity Possible CauseMaintenance and Service Information Replace battery modulesService Terms of warranty Two-Year Warranty