Connect Equipment to the UPS

2: START UP

Rear Panels 110/120 V:

230 V:

Note: A laser printer draws significantly more power than other types of equipment and may over- load the UPS.

Connect the UPS to the Network (if Applicable)

Serial Port

Telephone/ Network Surge Suppression Ports

Use only interface kits approved by APC.

Use only the supplied cable to connect to the Serial Port. A standard serial interface cable is incompatible with the UPS.

The UPS features optional telephone/network surge suppression. Connect a single line telephone or a 10 Base-T/ 100 Base-Tx network cable into the RJ-45/RJ-11 telephone/network surge protection IN jack on the back of the UPS. Use the telephone cable (not supplied) or network cabling (not supplied) to connect the OUT jack to a fax modem or network port.

Start the UPS

1.Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords. 110/120 V models: The power cord is attached to the UPS; the input plug is a NEMA 5- 15P. 230 V models: The power cord set is supplied in the UPS literature kit.

2.110/120 V models: Check the site wiring fault LED located on the rear panel. It will be illu- minated if the UPS is plugged into an improperly wired utility power outlet (see Troubleshoot- ing).

3.Turn on all connected equipment. (This allows the UPS to be used as a master on/off switch.)

4.Press the button on the front panel to power the UPS.

Note: The battery charges fully during the first four hours of normal operation. Do not expect full battery run capability during this initial charge period. Refer to www.apc.com for battery runtime charts.

5.For optimal computer system protection, install PowerChute Business Edition management software to fully configure UPS shutdown and alarm settings.

SC450RM1U, 250 VA, 450 VA specifications

American Power Conversion (APC), a leader in power protection and management, offers a range of uninterruptible power supplies (UPS) designed to meet the needs of various applications. The APC SC450RM1U is a highly regarded model in the 450 VA class, specifically tailored for critical equipment in server rooms and network closets. This UPS is engineered to ensure continuous power, safeguarding against unexpected outages and voltage fluctuations.

Among the key features of the APC SC450RM1U is its compact 1U rack-mount form factor, making it an ideal choice for limited space environments. Its 450 VA capacity is sufficient for protecting essential server and networking devices, providing the necessary runtime to safely reboot systems and preserve data integrity. Equipped with a pure sine wave output, the SC450RM1U ensures that connected equipment receives clean and stable power, which is crucial for maintaining optimal performance of sensitive electronics.

The SC450RM1U incorporates advanced technologies such as Automatic Voltage Regulation (AVR), which stabilizes voltage variations, ensuring that connected devices are shielded from harmful surges and dips. This technology helps extend battery life and enhances overall reliability, making it a cost-effective solution for power management.

Furthermore, the UPS includes a range of communication options to monitor power status and manage operations seamlessly. It features USB and serial connectivity, allowing users to easily interface with management software for real-time monitoring and control, enabling proactive maintenance and alerts in case of power issues.

Efficiency is another hallmark of the APC SC450RM1U, with a user-friendly interface that includes LED indicators for battery status, load level, and power events. It is designed for easy installation and maintenance, with hot-swappable batteries that can be replaced without powering down connected equipment, ensuring minimal disruption in service.

In conclusion, the APC SC450RM1U is a robust power management solution, defined by its compact size, advanced technology features like AVR and pure sine wave output, and flexible communication options. With its ability to enhance productivity and protect critical devices, it stands out as an essential component for any professional setup requiring reliable power protection.