Xerox 6030, 6050A manual Appendix 3 HP-RTL Command List 6050

Appendix 3 HP-RTL Command List (6030/

6050)

Command name	Command		Command Meaning and function	Limit
Enter HPGL/2 Mode	ESC % # B	Starts processing the following data		Transfer color
		as an HP-GL2 command.		palette ignored
Enter PCL Mode	ESC % # A	Starts processing the following data		Transfer color
		as an HP-RTL command.		palette ignored
Reset	ESC E	1.	Outputs the data received so far.	Parameters not
		2.	Executes the HP-GL2 IN	changed
			command.
		3.	Returns HP-RTL CAP to (0,0).
		4.	Sets the controller to the HP RTL
			parsing mode.
		5.	Terminates the raster mode.
Universal Exit	ESC % #xX	1.	Outputs all data input before this
Language/Start of			command.
PCL		2.	Returns the controller to the HP-
			GL2 or HP RTL parsing mode.
Apple Talk Config	ESC & B #	Sets communication with the Apple		Not supported
	W[binary data]	Talk driver.
Configure Image	ESC * v #	Sets up the controller as a color		Other
Data	W[data]	controller as follows.		commands
		1.	Determine each index bit and	ignored,
			creates a color palette.	excluding the
		2.	Set a color model.	pixel encoding
		3.	Set the pixel encoding mode.	command
		4.	Determines each RGB bit.
		5.	Sets a white/black value
			corresponding to RGB.
Set Red Parameter	ESC * v # aA	Defines the red color configuration of		Only
		the color palette.		concatenation
				command valid
Set Green Parameter	ESC * v # bB	Defines the green color configuration		Only
		of the color palette.		concatenation
				command valid

10 Appendixes